Neelim للاستشارات الصحية
Neelim

Prosthodontics Prometric exam questions

Fixed, removable, implant and maxillofacial prosthodontics, occlusion.

Tell us which regulator you are sitting and we send the bank prepared for that authority's exam.

For DHA · DOH · MOHAP · SHA · SCFHS · QCHP · NHRADHA PRO5051Pass mark DHA 60% · SCFHS 65% · QCHP 65%From 3 papers · ~150 Qs each
AED 319one-time
About a third of one exam fee
Request this question bank

Tell us your authority and we send the bank for that exam, usually the same day.

Or sit 12 questions free first →

What is riding on this exam

~AED 1,030
DHA exam fee, per attempt
Paid again on every re-sit. Other regulators' fees are in the table below.
3
UAE attempts - in total
Shared across DHA, DOH, MOHAP and SHA, not three each. Saudi, Qatar, Oman and Kuwait rules are in the FAQ.
60-65%
Pass mark, by regulator
DHA 60%, SCFHS 65%, QCHP 65%. Other regulators in the table below.

One failed attempt costs you the fee again, plus months of delay on your licence, your visa and your start date. This bank costs about a third of one exam fee.

Every regulator: format, pass marks and fees for all GCC licensing exams, each from the regulator's own documents.

The Prosthodontics exam at a glance

DHA (UAE) publishes a Prosthodontics exam of 150 MCQs in 3 hours with a 60% pass mark; DOH (UAE) publishes a Prosthodontics exam of 100 MCQs in 2 hours, scored pass or fail; SCFHS (Saudi Arabia) publishes a Prosthodontics exam of 200 MCQs in 240 minutes with a 65% pass mark; QCHP (Qatar) publishes a Prosthodontics exam of 150 MCQs in 3 hours with a 65% pass mark. MOHAP, SHA, NHRA do not publish Prosthodontics-specific figures; their regulator-wide format and pass-mark rules are in the full table. OMSB, Kuwait MOH publish no exam for this title.

DHA · UAE
Specialist Prosthodontics (PRO5051)
150 MCQs in 3 hours · pass mark 60% · USD 280 (about AED 1,030) · checked September 2026
DOH · UAE
Specialist Prosthodontics CBT
100 MCQs in 2 hours · pass mark Pass / fail only · AED 550 · checked October 2026
SCFHS · Saudi Arabia
Saudi Classification Examination - Prosthodontics
200 MCQs in 240 minutes · pass mark 65% · checked October 2026
QCHP · Qatar
Specialist Prosthodontics
150 MCQs in 3 hours · pass mark 65% · checked September 2026

From each regulator's own exam documents; the DHA row is from the DHA CBT Guideline, Sep 2026. Every other regulator is in the full GCC table.

Try two questions from this bank

Original questions from the bank - pick an answer to see the rationale and reference.

Q1Dental materials and laboratory procedures

A clinician mixing putty addition silicone by hand notices it does not set properly. What is the most likely cause?

Choose an answer to see the rationale.

Q2Complete dentures

In a lingualised occlusal scheme for complete dentures, which contact relationship is correct?

Choose an answer to see the rationale.

Not sure where you stand? Sit 12 of these questions free, timed at real exam pace, and see which domains you are weakest in.

Take the free mock exam →

Liked those? The full bank has 450 questions at this standard - every one with a rationale and a reference.

Get the full bank - AED 319

What's inside

  • ✓3 to 6 full-length papers (~150 Q each)
  • ✓No question repeated between papers
  • ✓Four options, one unambiguous best answer
  • ✓A full rationale on every question
  • ✓A real guideline or textbook reference
  • ✓Every sub-topic in the published blueprint
  • ✓Researched by Neelim's exam research team
  • ✓Prepared for your authority's exam, not a generic set

The Prosthodontics exam in every GCC country

Prosthodontics licensing exam in every GCC country
RegulatorExamFormatPass markFee per attempt
Specialist Prosthodontics (PRO5051)
150 MCQs in 3 hours60%USD 280 (about AED 1,030)
DOH
Abu Dhabi, Al Ain and Al Dhafra
Practise →
Specialist Prosthodontics CBT
100 MCQs in 2 hoursPass / fail onlyAED 550
SCFHS
Kingdom of Saudi Arabia
Practise →
Saudi Classification Examination - Prosthodontics
200 MCQs in 240 minutes65%Not published
QCHP
State of Qatar
Practise →
Specialist Prosthodontics
150 MCQs in 3 hours65%Not published
MOHAP
Northern Emirates - Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah
Practise →
MOHAP licensing exam
Regulator-wide format
Computer-basedNot publishedNot published
SHA
Emirate of Sharjah
Practise →
SHA licensing exam
Regulator-wide format
Set at assessmentNot publishedNot published
NHRA
Kingdom of Bahrain
Practise →
NHRA licensing exam
Regulator-wide format
Prometric CBTNot publishedNot published
OMSB
Sultanate of Oman
Practise →
No exam published for this title
No OMSB exam published for this title; check with OMSB
Not publishedNot publishedNot published
Kuwait MOH
State of Kuwait
Practise →
No exam published for this title
Kuwait MOH publishes no exam for this title; check with the MOH
Not publishedNot publishedNot published

Highlighted rows publish figures for this exact Prosthodontics exam; the others show the regulator's general rules.

From each regulator's own exam pages; anything a regulator does not publish says so. Assessment mode also depends on your licence title, so confirm your route on your eligibility notice.

Try 15 free Prosthodontics questions with answersDifferent from the samples on this page - each with a full explanationStart →

What the Prosthodontics exam covers

The published blueprint for this exam breaks into 8 domains and 50 testable sub-topics. Our bank covers every one of them - here is the full map, so you can see exactly what you are expected to know.

Diagnosis, treatment planning and occlusion~15%7 topics
  • Centric relation, maximum intercuspation and jaw relation records
  • Vertical dimension of occlusion and interocclusal rest space
  • Facebow transfer and articulator selection and programming
  • Condylar guidance, anterior guidance and cusp height
  • Occlusal schemes: mutually protected, group function, balanced
  • Shortened dental arch and prosthodontic treatment planning
  • Prosthodontic diagnostic indices and risk assessment
Complete dentures~15%7 topics
  • Impression techniques and border moulding
  • Posterior palatal seal: location and recording
  • Tooth arrangement, phonetics and aesthetics
  • Lingualised and balanced occlusion
  • Combination syndrome and the flabby ridge
  • Denture stomatitis and post-insertion problems
  • Immediate dentures and relining
Removable partial dentures~12%6 topics
  • Kennedy classification and Applegate's rules
  • Rests, rest seats and guide planes
  • Clasp design: RPI system, retentive undercut by alloy
  • Major connectors: lingual bar versus lingual plate
  • Indirect retention and the fulcrum line
  • Altered cast technique for distal extension bases
Fixed prosthodontics~15%7 topics
  • Tooth preparation principles: retention, resistance, reduction
  • Ferrule effect and post and core design
  • Abutment evaluation: Ante's law, crown-root ratio, pier abutments
  • Pontic design and ridge relationships
  • All-ceramic restorations: lithium disilicate and zirconia surface treatment
  • Resin-bonded bridges and cantilever designs
  • Luting cements and cementation protocols
Dental materials and laboratory procedures~12%6 topics
  • Elastomeric impression materials: chemistry and handling
  • Gypsum products and die materials
  • Metal-ceramic bonding and thermal expansion
  • Denture base resins: processing and porosity
  • Dental casting alloys and casting defects
  • CAD/CAM workflows and digital impressions
Implant prosthodontics~15%7 topics
  • Implant treatment planning, spacing and bone volume
  • Implant overdentures for the edentulous mandible
  • Screw-retained versus cement-retained restorations
  • Implant-protected occlusion
  • Peri-implant mucositis and peri-implantitis
  • Medical risk factors: antiresorptives, radiotherapy, smoking, diabetes
  • Prosthetic complications: screw loosening, fracture
Maxillofacial prosthetics and temporomandibular disorders~8%5 topics
  • Maxillectomy obturators: surgical, interim, definitive
  • Velopharyngeal dysfunction: palatal lift and speech bulb
  • Prosthodontic care of head and neck cancer patients
  • Temporomandibular disorders: diagnostic criteria and occlusal splints
  • Facial and ocular prostheses
Infection control, ethics and patient safety~8%5 topics
  • Disinfection of impressions and prostheses
  • Communication between clinic and dental laboratory
  • Informed consent and overtreatment
  • Professional conduct, records and confidentiality
  • Medical emergencies in the prosthodontic clinic

6 worked Prosthodontics practice questions

Original exam-style questions from the bank, spread across the blueprint domains. They are not real or recalled exam questions. Try each one, then open the answer for the rationale and reference. None of them appear in the free mock exam, so reading them will not spoil it.

  1. Question 1 · Complete dentures

    A patient has a mobile, fibrous anterior maxillary ridge. What impression approach best avoids distorting this tissue?

    1. AHigh-viscosity material under heavy pressure
    2. BClosed-mouth impression with heavy bite force
    3. CSelective pressure with a window over the flabby area
    4. DSurgical excision before any impression
    Show answer and explanation

    Correct answer: C. Selective pressure with a window over the flabby area

    A window or selective pressure technique records the flabby tissue in an undisplaced state, often with a low-viscosity material, while recording the rest of the denture-bearing area normally. Heavy pressure displaces the tissue, which rebounds and unseats the denture.

    Reference: Zarb's Prosthodontic Treatment for Edentulous Patients, 13th ed.

  2. Question 2 · Diagnosis, treatment planning and occlusion

    Which description best defines centric relation?

    1. AThe position of maximum intercuspation of the teeth
    2. BThe mandibular position when the patient is at rest
    3. CThe jaw position determined by the first tooth contact in closure
    4. DA jaw relationship with condyles seated anterosuperiorly, independent of tooth contact
    Show answer and explanation

    Correct answer: D. A jaw relationship with condyles seated anterosuperiorly, independent of tooth contact

    Centric relation is a reproducible maxillomandibular relationship with the condyles in the anterosuperior position against the articular eminences, independent of tooth contact. Maximum intercuspation is determined by the teeth and may differ from centric relation.

    Reference: The Glossary of Prosthodontic Terms, 10th ed.

  3. Question 3 · Diagnosis, treatment planning and occlusion

    What is the main purpose of a facebow record in fixed or removable prosthodontics?

    1. ATo record the vertical dimension of occlusion
    2. BTo record lateral condylar guidance
    3. CTo transfer the maxillary cast's relation to the hinge axis
    4. DTo measure the interocclusal rest space
    Show answer and explanation

    Correct answer: C. To transfer the maxillary cast's relation to the hinge axis

    A facebow relates the maxillary arch to the condylar hinge axis so the cast is mounted correctly on the articulator, making arcs of closure more accurate. Condylar guidance is set from protrusive or lateral records.

    Reference: The Glossary of Prosthodontic Terms, 10th ed.

  4. Question 4 · Fixed prosthodontics

    A five-unit bridge from canine to second molar has the second premolar as a pier abutment. Where is the non-rigid key and keyway connector usually placed?

    1. AKeyway on the distal of the pier abutment retainer
    2. BKeyway on the mesial of the canine retainer
    3. CKey on the distal of the molar retainer
    4. DA rigid connector at every joint
    Show answer and explanation

    Correct answer: A. Keyway on the distal of the pier abutment retainer

    In a pier abutment situation, a non-rigid connector reduces stress concentration; the keyway is usually placed on the distal of the pier retainer with the key on the mesial of the distal pontic, so mesial forces seat the key. A fully rigid design can lead to loosening of a terminal retainer.

    Reference: Shillingburg's Fundamentals of Fixed Prosthodontics, 4th ed.

  5. Question 5 · Fixed prosthodontics

    Which surface treatment is recommended before adhesive cementation of a zirconia crown?

    1. AAir abrasion with alumina and an MDP-containing primer
    2. BHydrofluoric acid etching and silane
    3. CPhosphoric acid etching alone
    4. DNo treatment; zirconia bonds like glass ceramic
    Show answer and explanation

    Correct answer: A. Air abrasion with alumina and an MDP-containing primer

    Zirconia contains no glass phase, so hydrofluoric acid etching is ineffective; low-pressure alumina air abrasion and an MDP-containing primer give a durable bond. Hydrofluoric acid and silane are used for glass ceramics such as lithium disilicate.

    Reference: Rosenstiel's Contemporary Fixed Prosthodontics, 5th ed.

  6. Question 6 · Implant prosthodontics

    Two adjacent implants are planned to replace maxillary central and lateral incisors. What minimum distance between the implants is recommended to preserve interimplant crestal bone?

    1. A1 mm
    2. B1.5 mm
    3. C6 mm
    4. D3 mm
    Show answer and explanation

    Correct answer: D. 3 mm

    An interimplant distance of at least 3 mm reduces crestal bone loss and helps preserve the papilla, while about 1.5 mm is advised between an implant and a natural tooth. Less than 3 mm between implants was linked to greater bone loss.

    Reference: Tarnow et al., Journal of Periodontology 2000

Prosthodontics reference books and guidelines

Every question in this bank names the textbook or guideline its answer rests on. These are the sources our Prosthodontics questions cite most often - the reading list to revise from alongside the bank.

Textbooks

9
  1. 1

    Zarb's Prosthodontic Treatment for Edentulous Patients

    13th edition
  2. 2

    McCracken's Removable Partial Prosthodontics

    13th edition
  3. 3

    Craig's Restorative Dental Materials

    14th edition
  4. 4

    Shillingburg's Fundamentals of Fixed Prosthodontics

    4th edition
  5. 5

    Misch's Contemporary Implant Dentistry

    4th edition
  6. 6

    The Glossary of Prosthodontic Terms

    10th edition
  7. 7

    Rosenstiel's Contemporary Fixed Prosthodontics

    5th edition
  8. 8

    Beumer's Maxillofacial Rehabilitation

    3rd edition
  9. 9

    Okeson's Management of Temporomandibular Disorders and Occlusion

    8th edition

Guidelines and standards

3
  1. 1

    McGill Consensus Statement on Overdentures

    2002
  2. 2

    AAOMS Position Paper on MRONJ

    2022
  3. 3

    CDC Guidelines for Infection Control in Dental Health-Care Settings

    2003

Where your regulator publishes a reading list, use the editions it names. Exam questions are not taken from any one book.

Last reviewed September 2026

About these questions: every question is original, researched by Neelim's exam research team, written to the published blueprint, with a rationale and a reference. No recalled or leaked exam content is used. How we write our questions.

Frequently asked questions

Are these real Prosthodontics exam questions?
No. Every item is original, researched by Neelim's exam research team against the exam blueprint published by the health authorities. Real, recalled or leaked exam content breaches the testing bodies' rules and can lead to a permanent exam ban - we do not sell it, and neither should anyone else.
How many questions are in the Prosthodontics bank?
Every bank starts at 3 full-length papers of roughly 150 questions each, the same length as the real computer-based exam, and you can add papers up to 6, including a bonus paper of our hardest questions. The papers do not overlap, so every question is new, and together they cover every sub-topic in the published blueprint.
What is the pass mark for the DHA Prosthodontics exam?
60%. DHA publishes the pass score for each exam, and 60% is the figure for Specialist Prosthodontics (PRO5051) in the DHA CBT Guideline, Sep 2026. The result is posted to your Sheryan account as Pass or Fail only - your score is not shared. Elsewhere in the GCC: DOH Pass / fail only, SCFHS 65%, QCHP 65%.
How many questions are in the DHA Prosthodontics exam, and how long is it?
150 multiple-choice questions in 3 hours, and the time includes registration and the introduction. It is a computer-based test delivered by Prometric at test centres in the UAE and abroad.
How much does the DHA Prosthodontics exam cost?
USD 280 (about AED 1,030) per attempt, paid again for every re-sit. DHA also charges a flat AED 200 credentialing fee through Sheryan.
How many attempts do I get?
In the UAE, three in total across DHA, DOH, MOHAP and SHA, not three each, under clause 1.5.4 of the Unified PQR (April 2025). Clause 1.5.5 allows one further attempt with a different authority, except on the Consultant route. Elsewhere in the GCC: SCFHS up to 4 a year, QCHP 5 per scope, OMSB no set maximum, Kuwait MOH 3, 6 weeks apart.
Does this cover DHA, DOH, MOHAP, SCFHS and the other GCC regulators?
Yes, and it is not a generic set. Tell us which regulator you are sitting and we send the bank prepared for that authority's exam: its blueprint, its exam length and pass mark, and its local regulations. The core clinical knowledge is shared across the GCC; what changes by regulator is the test vendor (Prometric for DHA, SCFHS, QCHP, NHRA, Kuwait MOH; Pearson VUE for DOH, OMSB), the exam length, the pass mark, the local-regulation questions and, at some regulators such as DOH, an added oral or OSCE component. The table on this page shows each regulator's published format, pass mark and fee, and says where a figure is not published.
How do I receive it?
As PDF files. Card checkout is being set up, so for now you request it from this page and we send it to you directly, usually the same day.

Still unsure whether you even need this exam?

Your route depends on your profession, your licence title and the authority. We have guided over 1,000 professionals through GCC licensing - tell us your situation and we will confirm exactly what you need to sit.