Free Dental Lab Technician mock test
12 original exam-style questions from our Dental Lab Technician bank, timed at the exam’s own pace, scored against the 55% DHA pass mark. They span 8 of the 8 blueprint domains, so you will see exactly where you are weakest - free, no sign-up.
Sit 12 original exam-style questions at real exam pace
These are 12 original questions taken from our Dental Lab Technician bank, spread across 8 of the 8 domains of the published blueprint. You get 72 seconds per question, which is exactly the pace of the real DLT5521 exam (14 minutes for 12). At the end you will see which domains you are weakest in, and the full worked reasoning for every question.
- 12
- questions
- 14:24
- time limit
- 55%
- DHA pass mark
A short diagnostic cannot predict whether you will pass - only the real exam does that. It will show you, honestly, where you currently stand.
Quick answer
The Dental Lab Technician exam at a glance
The Dental Lab Technician licensing exam is a computer-based, multiple-choice test, and each GCC regulator sets its own. DHA, DOH, SCFHS and QCHP publish exact figures, listed below. This free mock gives you 12 original exam-style questions at 72 seconds each, scored against the 55% DHA pass mark, then shows your weakest domains.
Published exam figures
- DHA
Dental Lab Technician (DLT5521)
UAE150 MCQs3 hours55%
pass mark
- DOH
Dental Lab Technician CBT
UAE50-100 MCQs1-2 hoursPass / fail only
pass mark
- SCFHS
Saudi Classification Examination - Dental Laboratory Specialist
Saudi Arabia150 MCQs180 minutes60%
pass mark
- QCHP
Dental Lab Technician
Qatar150 MCQs3 hours50%
pass mark
- Attempts in the UAE
- 3 in total across DHA, DOH, MOHAP and SHA
- This free mock
- 12 questions · 14 minutes · 8 of 8 domains
- Full bank
- 450+ questions · 3 to 6 papers · AED 199
- Regulators
- DHA, DOH, SCFHS, QCHP, MOHAP, SHA, NHRA, OMSB and Kuwait MOH
How this free Dental Lab Technician mock works
- 12
- original questions
- 14 min
- time limit
- 72s
- per question
- 8 of 8
- blueprint domains
- You get 72 seconds per question, the pace of a 150-question paper in 3 hours. The timer runs in your browser and ends the sitting when it reaches zero.
- Your score is set against the 55% DHA pass mark, the published figure for this exam. No other number is invented: there is no percentile and no pass probability.
- At the end you see your score, your pace per question, every domain ranked weakest first, and the worked answer and source for all 12 questions.
- You can mark each answer “sure” or “not sure”. Wrong answers you were sure about are shown first, because they are the ones you would not stop to check in the real exam.
- Your last result is saved in your own browser only, so you can come back and compare. Nothing is sent to us.
What the real Dental Lab Technician licensing exam looks like
The Dental Lab Technician exam is a computer-based multiple-choice paper, published by 4 regulators: DHA DLT5521 (pass mark 55%), DOH (pass mark Pass / fail only), SCFHS (pass mark 60%), QCHP (pass mark 50%). Every regulator's format, pass mark and fee is in the table below; confirm yours before booking.
Pass marks at a glance: exam codes and pass marks by regulator for every written exam in one sourced table.
Before you can book the exam at all you need Dataflow primary source verification of your degree, licence and experience, which typically runs several weeks. Candidates often underestimate this and end up sitting the exam sooner after study than they planned. Check where you stand with our free eligibility checker or confirm whether your title even requires an exam using the Prometric exam checker.
You get three attempts in total across all UAE authorities, not three each, under the Unified Professional Qualification Requirements. At roughly AED 880 per attempt, plus the licensing delay each failure adds to your visa and start date, the cost of going in underprepared is not really the exam fee.
| Regulator | Exam | Format | Pass mark | Fee per attempt |
|---|---|---|---|---|
Dental Lab Technician (DLT5521) | 150 MCQs in 3 hours | 55% | USD 240 (about AED 880) | |
Dental Lab Technician CBT | 50-100 MCQs in 1-2 hours | Pass / fail only | AED 500 | |
Saudi Classification Examination - Dental Laboratory Specialist | 150 MCQs in 180 minutes | 60% | Not published | |
Dental Lab Technician | 150 MCQs in 3 hours | 50% | Not published | |
MOHAP licensing exam Regulator-wide format | Computer-based | Not published | Not published | |
SHA licensing exam Regulator-wide format | Set at assessment | Not published | Not published | |
NHRA licensing exam Regulator-wide format | Prometric CBT | Not published | Not published | |
No exam published for this title No OMSB exam published for this title; check with OMSB | Not published | Not published | Not published | |
No exam published for this title Kuwait MOH publishes no exam for this title; check with the MOH | Not published | Not published | Not published |
Highlighted rows publish figures for this exact Dental Lab Technician exam; the others show the regulator's general rules.
What is on the Dental Lab Technician exam: the full blueprint
The published blueprint splits into 8 domains and 46 testable sub-topics. For each one you can see its weight, how many questions this mock asks on it, and about how many the full bank holds.
- Dental Materials Science~16%
6 sub-topics · 2 in this mock · about 72 in the full bank
- Fixed Prosthodontics and Metal-Ceramics~16%
7 sub-topics · 3 in this mock · about 72 in the full bank
- All-Ceramic Restorations and CAD/CAM~12%
5 sub-topics · 1 in this mock · about 54 in the full bank
- Removable Partial Dentures~14%
6 sub-topics · 2 in this mock · about 63 in the full bank
- Complete Dentures~12%
6 sub-topics · 1 in this mock · about 54 in the full bank
- Orthodontic and Other Appliances~8%
5 sub-topics · 1 in this mock · about 36 in the full bank
- Dental Anatomy, Occlusion and Articulators~10%
5 sub-topics · 1 in this mock · about 45 in the full bank
- Laboratory Safety, Infection Control and Ethics~12%
6 sub-topics · 1 in this mock · about 54 in the full bank
Bank counts are estimates from the published weights the bank is written to, rounded.
This mock samples 8 of 8 domains. The full bank covers all 8 across 450+ questions.
See the full bank - AED 199How to use your mock score
These bands are set against the 55% DHA pass mark and match the verdict on your result screen. On 12 questions, a score near the pass mark has a 95% margin of error of about ±28 points, so treat the band as a direction, not a forecast.
Below the line
On this sample you would likely fall short of the 55% pass mark today. Do not book yet. Start with your two weakest domains from the result, then sit full-length papers until you clear the line with room to spare.
Close to the line
A few questions decide it. On a 150-question paper, every 1% is one or two questions, so drill your weakest domains and build a margin on timed papers before you book.
On track
Clear of the pass mark on this sample. 12 questions is a small sample, so confirm it over full-length timed papers before you book: stamina and pacing fail candidates who know the material.
Getting an honest score
- 1Sit it cold, once. Do not look anything up. A diagnostic you help yourself through tells you nothing. The number you get is only useful if it is honest.
- 2Read every rationale, especially the ones you got right. Getting a question right by elimination is not the same as knowing it. The worked reasoning is free, whether or not you buy anything.
- 3Work on your weakest domain first. The breakdown orders your domains worst first for exactly this reason. Studying what you are already good at feels productive and moves nothing.
- 4Re-sit under full exam conditions later. The real paper is much longer than 12 questions and stamina matters. The full bank's 3 to 6 papers are written for exactly this.
A worked Dental Lab Technician exam question
Every question in the mock and in the paid bank is written to this standard: a clinical stem, four plausible options and the reasoning for the answer, with its source.
All-Ceramic Restorations and CAD/CAM
A dentist sends an intraoral scan to the laboratory. Which open file format is most commonly used for the 3D surface mesh?
- ADICOM
- BSTLCorrect
- CJPEG
- DDOCX
Why: STL describes surfaces as triangle meshes and is the standard open format for exchanging scan and design data. DICOM is the format for CT and CBCT images, not surface scans.
Source: Sakaguchi, Craig's Restorative Dental Materials, 14th ed.
Dental Lab Technician sample questions with answers
4 more original exam-style Dental Lab Technician questions, worked in full. They are not real or recalled exam questions, and none of them is in the mock above or on the bank page, so sit the mock first if you have not.
Question 1 · All-Ceramic Restorations and CAD/CAM
How should the fitting surface of a zirconia crown be prepared for resin bonding?
- AHydrofluoric acid etching followed by silane
- BLow-pressure alumina air abrasion and MDP primer
- CPhosphoric acid etching only
- DRoughening with a coarse diamond bur only
Show answer and explanation
Correct answer: B. Low-pressure alumina air abrasion and MDP primer
Zirconia has no glass phase, so hydrofluoric acid does not etch it; gentle alumina air abrasion and an MDP-containing primer give a durable bond. HF acid with silane is the protocol for glass-ceramics such as lithium disilicate.
Reference: Blatz MB, et al. J Dent Res 2018; Sakaguchi, Craig's Restorative Dental Materials, 14th ed.
Question 2 · Complete Dentures
When setting maxillary central incisors for a complete denture, how far anterior to the centre of the incisive papilla is the labial surface usually placed?
- A1-2 mm
- B8-10 mm
- C3-4 mm
- D15-18 mm
Show answer and explanation
Correct answer: B. 8-10 mm
The labial surfaces of the maxillary central incisors are usually 8-10 mm anterior to the centre of the incisive papilla, a useful starting guide for lip support. Placing them only 1-2 mm forward gives poor lip support.
Reference: Zarb, Prosthodontic Treatment for Edentulous Patients, 13th ed.
Question 3 · Dental Materials Science
A heat-cured acrylic denture shows bubbles concentrated in the thickest part of the palate, not near the surface. What is the most likely cause?
- AToo little pressure during packing
- BToo much separating medium applied
- CCuring temperature raised too quickly
- DPolymer-to-monomer ratio too high
Show answer and explanation
Correct answer: C. Curing temperature raised too quickly
Rapid heating lets the exothermic reaction push the internal temperature above the boiling point of monomer (about 100.8 C), causing gaseous porosity in thick sections. Too little packing pressure causes porosity spread throughout the base, not concentrated in thick areas.
Reference: Anusavice, Phillips' Science of Dental Materials, 12th ed.
Question 4 · Dental Anatomy, Occlusion and Articulators
When waxing a full-contour crown for a mandibular first molar, how many cusps are normally created?
- AFive
- BThree
- CFour
- DSix
Show answer and explanation
Correct answer: A. Five
The mandibular first molar normally has five cusps: mesiobuccal, distobuccal, distal, mesiolingual and distolingual. The mandibular second molar typically has four.
Reference: Wheeler's Dental Anatomy, Physiology and Occlusion, 11th ed.
Free mock vs the full Dental Lab Technician bank
The mock tells you where you stand. The bank is how you close the gap.
| What you get | Free mock | Full bank |
|---|---|---|
| Questions | 12 | 450+ |
| Papers | 1 short timed set | 3 to 6 full-length papers, about 150 each |
| Blueprint coverage | 8 of 8 domains | All 8 domains, 46 sub-topics |
| Worked rationale | Every question | Every question |
| Reference | Every question | Every question |
| Timing | 14 minutes in your browser | Exam-length papers to sit against the clock |
| Format | Online, free | PDF sent to you, yours to keep |
| Price | Free | AED 199, paid once |
Full Dental Lab Technician bank
Close your gaps before exam day
- 450+ original questions in 3 to 6 full-length papers
- A worked rationale and a reference on every question
- Prepared for your regulator's blueprint and pass mark
One-time price
AED 199
About a quarter of one exam fee (about AED 880 per attempt)
Unlock the full bank →No subscription · yours to keep
Frequently asked questions
Is this Dental Lab Technician mock test really free?
Are these real Dental Lab Technician exam questions?
What is the pass mark for the Dental Lab Technician exam?
How long is the Dental Lab Technician exam and how many questions?
What topics does the Dental Lab Technician exam cover?
How is the full Dental Lab Technician bank different from this mock?
What score should I aim for on this Dental Lab Technician mock?
Does passing this mock mean I will pass the real exam?
Which regulators is this Dental Lab Technician mock for?
How many attempts do I get at the real exam?
Other free mock exams in dental
Keep going
From a 12-question mock to the full Dental Lab Technician bank
450+ original questions in 3 to 6 full-length papers, each with a worked rationale and a reference, written to the same blueprint as the free mock on this page. One price: AED 199.