Neelim للاستشارات الصحية
Neelim

Dental Lab Technician Prometric exam questions

Dental materials, crown and bridge, dentures, orthodontic appliances.

Tell us which regulator you are sitting and we send the bank prepared for that authority's exam.

For DHA · DOH · MOHAP · SHA · SCFHS · QCHP · NHRADHA DLT5521Pass mark DHA 55% · SCFHS 60% · QCHP 50%From 3 papers · ~150 Qs each
AED 199one-time
About a quarter of one exam fee
Request this question bank

Tell us your authority and we send the bank for that exam, usually the same day.

Or sit 12 questions free first →

What is riding on this exam

~AED 880
DHA exam fee, per attempt
Paid again on every re-sit. Other regulators' fees are in the table below.
3
UAE attempts - in total
Shared across DHA, DOH, MOHAP and SHA, not three each. Saudi, Qatar, Oman and Kuwait rules are in the FAQ.
50-60%
Pass mark, by regulator
DHA 55%, SCFHS 60%, QCHP 50%. Other regulators in the table below.

One failed attempt costs you the fee again, plus months of delay on your licence, your visa and your start date. This bank costs about a quarter of one exam fee.

Every regulator: format, pass marks and fees for all GCC licensing exams, each from the regulator's own documents.

The Dental Lab Technician exam at a glance

DHA (UAE) publishes a Dental Lab Technician exam of 150 MCQs in 3 hours with a 55% pass mark; DOH (UAE) publishes a Dental Lab Technician exam of 50-100 MCQs in 1-2 hours, scored pass or fail; SCFHS (Saudi Arabia) publishes a Dental Lab Technician exam of 150 MCQs in 180 minutes with a 60% pass mark; QCHP (Qatar) publishes a Dental Lab Technician exam of 150 MCQs in 3 hours with a 50% pass mark. MOHAP, SHA, NHRA do not publish Dental Lab Technician-specific figures; their regulator-wide format and pass-mark rules are in the full table. OMSB, Kuwait MOH publish no exam for this title.

DHA · UAE
Dental Lab Technician (DLT5521)
150 MCQs in 3 hours · pass mark 55% · USD 240 (about AED 880) · checked September 2026
DOH · UAE
Dental Lab Technician CBT
50-100 MCQs in 1-2 hours · pass mark Pass / fail only · AED 500 · checked October 2026
SCFHS · Saudi Arabia
Saudi Classification Examination - Dental Laboratory Specialist
150 MCQs in 180 minutes · pass mark 60% · checked October 2026
QCHP · Qatar
Dental Lab Technician
150 MCQs in 3 hours · pass mark 50% · checked September 2026

From each regulator's own exam documents; the DHA row is from the DHA CBT Guideline, Sep 2026. Every other regulator is in the full GCC table.

Try two questions from this bank

Original questions from the bank - pick an answer to see the rationale and reference.

Q1Complete Dentures

A dentist requests replacement of the entire acrylic base of a complete denture while keeping the existing teeth. What is this procedure called?

Choose an answer to see the rationale.

Q2Complete Dentures

During flasking of a complete denture, which material is painted on the gypsum mould before packing acrylic?

Choose an answer to see the rationale.

Not sure where you stand? Sit 12 of these questions free, timed at real exam pace, and see which domains you are weakest in.

Take the free mock exam →

Liked those? The full bank has 450 questions at this standard - every one with a rationale and a reference.

Get the full bank - AED 199

What's inside

  • ✓3 to 6 full-length papers (~150 Q each)
  • ✓No question repeated between papers
  • ✓Four options, one unambiguous best answer
  • ✓A full rationale on every question
  • ✓A real guideline or textbook reference
  • ✓Every sub-topic in the published blueprint
  • ✓Researched by Neelim's exam research team
  • ✓Prepared for your authority's exam, not a generic set

The Dental Lab Technician exam in every GCC country

Dental Lab Technician licensing exam in every GCC country
RegulatorExamFormatPass markFee per attempt
Dental Lab Technician (DLT5521)
150 MCQs in 3 hours55%USD 240 (about AED 880)
DOH
Abu Dhabi, Al Ain and Al Dhafra
Practise →
Dental Lab Technician CBT
50-100 MCQs in 1-2 hoursPass / fail onlyAED 500
SCFHS
Kingdom of Saudi Arabia
Practise →
Saudi Classification Examination - Dental Laboratory Specialist
150 MCQs in 180 minutes60%Not published
QCHP
State of Qatar
Practise →
Dental Lab Technician
150 MCQs in 3 hours50%Not published
MOHAP
Northern Emirates - Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah
Practise →
MOHAP licensing exam
Regulator-wide format
Computer-basedNot publishedNot published
SHA
Emirate of Sharjah
Practise →
SHA licensing exam
Regulator-wide format
Set at assessmentNot publishedNot published
NHRA
Kingdom of Bahrain
Practise →
NHRA licensing exam
Regulator-wide format
Prometric CBTNot publishedNot published
OMSB
Sultanate of Oman
Practise →
No exam published for this title
No OMSB exam published for this title; check with OMSB
Not publishedNot publishedNot published
Kuwait MOH
State of Kuwait
Practise →
No exam published for this title
Kuwait MOH publishes no exam for this title; check with the MOH
Not publishedNot publishedNot published

Highlighted rows publish figures for this exact Dental Lab Technician exam; the others show the regulator's general rules.

From each regulator's own exam pages; anything a regulator does not publish says so. Assessment mode also depends on your licence title, so confirm your route on your eligibility notice.

Try 15 free Dental Lab Technician questions with answersDifferent from the samples on this page - each with a full explanationStart →

What the Dental Lab Technician exam covers

The published blueprint for this exam breaks into 8 domains and 46 testable sub-topics. Our bank covers every one of them - here is the full map, so you can see exactly what you are expected to know.

Dental Materials Science~16%6 topics
  • Gypsum products: types, water-powder ratio, setting expansion
  • Impression materials: alginate and elastomers
  • Investments: gypsum-bonded and phosphate-bonded
  • Denture base resins: polymerisation and porosity
  • Dental alloys: noble, base metal and titanium
  • Waxes and their properties
Fixed Prosthodontics and Metal-Ceramics~16%7 topics
  • Die preparation and die spacer
  • Wax pattern and spruing
  • Lost-wax casting and casting defects
  • Metal-ceramic bonding and thermal expansion
  • Porcelain build-up, firing and glazing
  • Pontic design
  • Post and core fabrication
All-Ceramic Restorations and CAD/CAM~12%5 topics
  • Lithium disilicate: pressing and crystallisation
  • Zirconia: sintering shrinkage and transformation toughening
  • Surface treatment of ceramics for bonding
  • Digital workflow: scanning, design and STL files
  • Milling and 3D printing
Removable Partial Dentures~14%6 topics
  • Kennedy classification and Applegate's rules
  • Surveying and path of insertion
  • Clasp design and undercut depth
  • Major and minor connectors
  • Rests and rest seats
  • Cobalt-chromium framework casting
Complete Dentures~12%6 topics
  • Record blocks and jaw relationship records
  • Posterior palatal seal
  • Tooth selection and arrangement
  • Occlusal schemes for complete dentures
  • Flasking, packing and processing
  • Relining, rebasing and repairs
Orthodontic and Other Appliances~8%5 topics
  • Removable orthodontic appliances: clasps and springs
  • Retainers
  • Occlusal splints and sports mouthguards
  • Soldering and welding
  • Wire properties: stainless steel and nickel-titanium
Dental Anatomy, Occlusion and Articulators~10%5 topics
  • Tooth notation systems
  • Crown morphology of permanent teeth
  • Occlusal curves and planes
  • Facebow transfer and articulator types
  • Mandibular movements and condylar guidance
Laboratory Safety, Infection Control and Ethics~12%6 topics
  • Disinfection of impressions and appliances
  • Dust, silica and local exhaust ventilation
  • Chemical hazards: monomer, acids and beryllium
  • Personal protective equipment
  • Laboratory prescriptions and communication with the dentist
  • Medical device regulations and record keeping

6 worked Dental Lab Technician practice questions

Original exam-style questions from the bank, spread across the blueprint domains. They are not real or recalled exam questions. Try each one, then open the answer for the rationale and reference. None of them appear in the free mock exam, so reading them will not spoil it.

  1. Question 1 · All-Ceramic Restorations and CAD/CAM

    Why is a pre-sintered zirconia framework milled larger than the final restoration?

    1. ATo allow for later veneering porcelain expansion
    2. BTo leave extra material for later hand finishing
    3. CTo compensate for about 20-25% sintering shrinkage
    4. DTo compensate for cement thickness
    Show answer and explanation

    Correct answer: C. To compensate for about 20-25% sintering shrinkage

    Zirconia shrinks roughly 20-25% linearly during sintering, so the software enlarges the design to match. Hand finishing and cement space are minor and not the reason for oversizing.

    Reference: Sakaguchi, Craig's Restorative Dental Materials, 14th ed.

  2. Question 2 · Dental Anatomy, Occlusion and Articulators

    A lab prescription asks for a crown on tooth 36 (FDI notation). Which tooth is this?

    1. AMaxillary left first molar
    2. BMandibular right first molar
    3. CMandibular left second premolar
    4. DMandibular left first molar
    Show answer and explanation

    Correct answer: D. Mandibular left first molar

    In FDI notation, quadrant 3 is the mandibular left and tooth 6 is the first molar. Quadrant 2 would be maxillary left and quadrant 4 mandibular right.

    Reference: ISO 3950 Dentistry: Designation system for teeth

  3. Question 3 · Dental Materials Science

    A technician needs a die for a cast crown that resists abrasion during waxing and has low setting expansion. Which gypsum product is most suitable?

    1. AType II low-strength model plaster
    2. BType I impression plaster
    3. CType III dental stone
    4. DType IV high-strength die stone
    Show answer and explanation

    Correct answer: D. Type IV high-strength die stone

    Type IV die stone has the highest strength and surface hardness with low setting expansion, making it ideal for dies. Type III stone is for working casts of dentures and is less abrasion-resistant.

    Reference: Craig's Restorative Dental Materials, 14th ed.

  4. Question 4 · Fixed Prosthodontics and Metal-Ceramics

    Why is the porcelain in a metal-ceramic crown formulated with a coefficient of thermal expansion slightly lower than that of the alloy?

    1. ATo leave porcelain in residual compression
    2. BTo leave porcelain in residual tension
    3. CTo lower the firing temperature
    4. DTo improve translucency of opaque
    Show answer and explanation

    Correct answer: A. To leave porcelain in residual compression

    On cooling, the alloy contracts slightly more than the porcelain, placing the porcelain in residual compression; ceramics resist compression far better than tension. A porcelain with higher expansion than the alloy would be in tension and craze or crack.

    Reference: Anusavice, Phillips' Science of Dental Materials, 12th ed.

  5. Question 5 · Fixed Prosthodontics and Metal-Ceramics

    A cast crown shows a porous area where the sprue joins the casting. What is the most likely cause and correction?

    1. AGas porosity; lower the alloy casting temperature
    2. BInvestment inclusion; vibrate the investment more
    3. CSuck-back porosity; use a thicker sprue or reservoir
    4. DBack-pressure porosity; use a thinner sprue
    Show answer and explanation

    Correct answer: C. Suck-back porosity; use a thicker sprue or reservoir

    Suck-back porosity forms at the sprue junction when that area solidifies last and pulls metal from the casting; a larger sprue or reservoir keeps the sprue molten longer. Back-pressure porosity occurs on the outer surface where gas cannot escape, not at the sprue junction.

    Reference: Anusavice, Phillips' Science of Dental Materials, 12th ed.

  6. Question 6 · Laboratory Safety, Infection Control and Ethics

    A technician develops fingertip dermatitis after handling acrylic dough while wearing latex gloves. What is the most likely explanation?

    1. AMethyl methacrylate passes through latex gloves
    2. BLatex gloves fully block methacrylates
    3. CThe reaction is caused by gypsum dust
    4. DHeat-cured acrylic dough contains no free monomer
    Show answer and explanation

    Correct answer: A. Methyl methacrylate passes through latex gloves

    Methyl methacrylate monomer penetrates latex and vinyl gloves within minutes and is a common cause of allergic contact dermatitis in technicians. Avoiding direct contact and using more resistant gloves reduces exposure.

    Reference: Anusavice, Phillips' Science of Dental Materials, 12th ed.

Dental Lab Technician reference books and guidelines

Every question in this bank names the textbook or guideline its answer rests on. These are the sources our Dental Lab Technician questions cite most often - the reading list to revise from alongside the bank.

Textbooks

8
  1. 1

    Anusavice, Phillips' Science of Dental Materials

    12th edition
  2. 2

    Sakaguchi, Craig's Restorative Dental Materials

    14th edition
  3. 3

    Shillingburg, Fundamentals of Fixed Prosthodontics

    4th edition
  4. 4

    McCracken's Removable Partial Prosthodontics

    13th edition
  5. 5

    Zarb, Prosthodontic Treatment for Edentulous Patients

    13th edition
  6. 6

    Wheeler's Dental Anatomy, Physiology and Occlusion

    11th edition
  7. 7

    ISO 3950 Dentistry: Designation system for teeth

  8. 8

    The Glossary of Prosthodontic Terms

    9th edition

Guidelines and standards

2
  1. 1

    ADA Councils: Using mouthguards to reduce orofacial injuries, JADA

    2006
  2. 2

    CDC Guidelines for Infection Control in Dental Health-Care Settings

    2003

Where your regulator publishes a reading list, use the editions it names. Exam questions are not taken from any one book.

Last reviewed September 2026

About these questions: every question is original, researched by Neelim's exam research team, written to the published blueprint, with a rationale and a reference. No recalled or leaked exam content is used. How we write our questions.

Frequently asked questions

Are these real Dental Lab Technician exam questions?
No. Every item is original, researched by Neelim's exam research team against the exam blueprint published by the health authorities. Real, recalled or leaked exam content breaches the testing bodies' rules and can lead to a permanent exam ban - we do not sell it, and neither should anyone else.
How many questions are in the Dental Lab Technician bank?
Every bank starts at 3 full-length papers of roughly 150 questions each, the same length as the real computer-based exam, and you can add papers up to 6, including a bonus paper of our hardest questions. The papers do not overlap, so every question is new, and together they cover every sub-topic in the published blueprint.
What is the pass mark for the DHA Dental Lab Technician exam?
55%. DHA publishes the pass score for each exam, and 55% is the figure for Dental Lab Technician (DLT5521) in the DHA CBT Guideline, Sep 2026. The result is posted to your Sheryan account as Pass or Fail only - your score is not shared. Elsewhere in the GCC: DOH Pass / fail only, SCFHS 60%, QCHP 50%.
How many questions are in the DHA Dental Lab Technician exam, and how long is it?
150 multiple-choice questions in 3 hours, and the time includes registration and the introduction. It is a computer-based test delivered by Prometric at test centres in the UAE and abroad.
How much does the DHA Dental Lab Technician exam cost?
USD 240 (about AED 880) per attempt, paid again for every re-sit. DHA also charges a flat AED 200 credentialing fee through Sheryan.
How many attempts do I get?
In the UAE, three in total across DHA, DOH, MOHAP and SHA, not three each, under clause 1.5.4 of the Unified PQR (April 2025). Clause 1.5.5 allows one further attempt with a different authority, except on the Consultant route. Elsewhere in the GCC: SCFHS up to 4 a year, QCHP 5 per scope, OMSB no set maximum, Kuwait MOH 3, 6 weeks apart.
Does this cover DHA, DOH, MOHAP, SCFHS and the other GCC regulators?
Yes, and it is not a generic set. Tell us which regulator you are sitting and we send the bank prepared for that authority's exam: its blueprint, its exam length and pass mark, and its local regulations. The core clinical knowledge is shared across the GCC; what changes by regulator is the test vendor (Prometric for DHA, SCFHS, QCHP, NHRA, Kuwait MOH; Pearson VUE for DOH, OMSB), the exam length, the pass mark, the local-regulation questions and, at some regulators such as DOH, an added oral or OSCE component. The table on this page shows each regulator's published format, pass mark and fee, and says where a figure is not published.
How do I receive it?
As PDF files. Card checkout is being set up, so for now you request it from this page and we send it to you directly, usually the same day.

Still unsure whether you even need this exam?

Your route depends on your profession, your licence title and the authority. We have guided over 1,000 professionals through GCC licensing - tell us your situation and we will confirm exactly what you need to sit.