Free Cast Technician mock test
12 original exam-style questions from our Cast Technician bank, timed at the exam’s own pace, scored against the 50% DHA pass mark. They span 6 of the 7 blueprint domains, so you will see exactly where you are weakest - free, no sign-up.
Sit 12 original exam-style questions at real exam pace
These are 12 original questions taken from our Cast Technician bank, spread across 6 of the 7 domains of the published blueprint. You get 72 seconds per question, which is exactly the pace of the real CTE5862 exam (14 minutes for 12). At the end you will see which domains you are weakest in, and the full worked reasoning for every question.
- 12
- questions
- 14:24
- time limit
- 50%
- DHA pass mark
A short diagnostic cannot predict whether you will pass - only the real exam does that. It will show you, honestly, where you currently stand.
Quick answer
The Cast Technician exam at a glance
The Cast Technician licensing exam is a computer-based, multiple-choice test, and each GCC regulator sets its own. DHA publishes exact figures, listed below. DOH licenses the title without a published written exam. This free mock gives you 12 original exam-style questions at 72 seconds each, scored against the 50% DHA pass mark, then shows your weakest domains.
Published exam figures
- DHA
Cast Technician (CTE5862)
UAE100 MCQs2 hours50%
pass mark
- Attempts in the UAE
- 3 in total across DHA, DOH, MOHAP and SHA
- This free mock
- 12 questions · 14 minutes · 6 of 7 domains
- Full bank
- 450+ questions · 3 to 6 papers · AED 199
- Regulators
- DHA, DOH, MOHAP, SHA, SCFHS, QCHP, NHRA, OMSB and Kuwait MOH
How this free Cast Technician mock works
- 12
- original questions
- 14 min
- time limit
- 72s
- per question
- 6 of 7
- blueprint domains
- You get 72 seconds per question, the pace of a 150-question paper in 3 hours. The timer runs in your browser and ends the sitting when it reaches zero.
- Your score is set against the 50% DHA pass mark, the published figure for this exam. No other number is invented: there is no percentile and no pass probability.
- At the end you see your score, your pace per question, every domain ranked weakest first, and the worked answer and source for all 12 questions.
- You can mark each answer “sure” or “not sure”. Wrong answers you were sure about are shown first, because they are the ones you would not stop to check in the real exam.
- Your last result is saved in your own browser only, so you can come back and compare. Nothing is sent to us.
What the real Cast Technician licensing exam looks like
The Cast Technician exam is a computer-based multiple-choice paper, published by one regulator: DHA CTE5862 (pass mark 50%). DOH license the title without a published written exam. Every regulator's format, pass mark and fee is in the table below; confirm yours before booking.
Pass marks at a glance: exam codes and pass marks by regulator for every written exam in one sourced table.
Before you can book the exam at all you need Dataflow primary source verification of your degree, licence and experience, which typically runs several weeks. Candidates often underestimate this and end up sitting the exam sooner after study than they planned. Check where you stand with our free eligibility checker or confirm whether your title even requires an exam using the Prometric exam checker.
You get three attempts in total across all UAE authorities, not three each, under the Unified Professional Qualification Requirements. At roughly AED 660 per attempt, plus the licensing delay each failure adds to your visa and start date, the cost of going in underprepared is not really the exam fee.
| Regulator | Exam | Format | Pass mark | Fee per attempt |
|---|---|---|---|---|
Cast Technician (CTE5862) | 100 MCQs in 2 hours | 50% | USD 180 (about AED 660) | |
No written exam published Oral assessment, 45-60 minutes; no written exam (DOH Licensing Procedure Manual 2024) | Panel / review | Not published | Not published | |
MOHAP licensing exam Regulator-wide format | Computer-based | Not published | Not published | |
SHA licensing exam Regulator-wide format | Set at assessment | Not published | Not published | |
No exam published for this title Not in the SCFHS classification exam list; check the title with SCFHS | Not published | Not published | Not published | |
No exam published for this title No DHP Qatar exam blueprint published for this title; check with DHP | Not published | Not published | Not published | |
NHRA licensing exam Regulator-wide format | Prometric CBT | Not published | Not published | |
No exam published for this title No OMSB exam published for this title; check with OMSB | Not published | Not published | Not published | |
No exam published for this title Kuwait MOH publishes no exam for this title; check with the MOH | Not published | Not published | Not published |
Highlighted rows publish figures for this exact Cast Technician exam; the others show the regulator's general rules.
What is on the Cast Technician exam: the full blueprint
The published blueprint splits into 7 domains and 40 testable sub-topics. For each one you can see its weight, how many questions this mock asks on it, and about how many the full bank holds.
- Musculoskeletal Anatomy and Fractures~15%
6 sub-topics · 3 in this mock · about 68 in the full bank
- Casting Materials~12%
5 sub-topics · 2 in this mock · about 54 in the full bank
- Cast Application Techniques~18%
7 sub-topics · 2 in this mock · about 81 in the full bank
- Splints and Immobilisation Devices~12%
5 sub-topics · 1 in this mock · about 54 in the full bank
- Complications and Patient Monitoring~18%
6 sub-topics · 3 in this mock · about 81 in the full bank
- Cast Removal and Equipment Safety~10%
5 sub-topics · not in this mock · about 45 in the full bank
- Patient Education, Infection Control and Professional Practice~15%
6 sub-topics · 1 in this mock · about 68 in the full bank
Bank counts are estimates from the published weights the bank is written to, rounded.
This mock samples 6 of 7 domains. The full bank covers all 7 across 450+ questions, including the one domain this mock does not reach.
See the full bank - AED 199How to use your mock score
These bands are set against the 50% DHA pass mark and match the verdict on your result screen. On 12 questions, a score near the pass mark has a 95% margin of error of about ±28 points, so treat the band as a direction, not a forecast.
Below the line
On this sample you would likely fall short of the 50% pass mark today. Do not book yet. Start with your two weakest domains from the result, then sit full-length papers until you clear the line with room to spare.
Close to the line
A few questions decide it. On a 150-question paper, every 1% is one or two questions, so drill your weakest domains and build a margin on timed papers before you book.
On track
Clear of the pass mark on this sample. 12 questions is a small sample, so confirm it over full-length timed papers before you book: stamina and pacing fail candidates who know the material.
Getting an honest score
- 1Sit it cold, once. Do not look anything up. A diagnostic you help yourself through tells you nothing. The number you get is only useful if it is honest.
- 2Read every rationale, especially the ones you got right. Getting a question right by elimination is not the same as knowing it. The worked reasoning is free, whether or not you buy anything.
- 3Work on your weakest domain first. The breakdown orders your domains worst first for exactly this reason. Studying what you are already good at feels productive and moves nothing.
- 4Re-sit under full exam conditions later. The real paper is much longer than 12 questions and stamina matters. The full bank's 3 to 6 papers are written for exactly this.
A worked Cast Technician exam question
Every question in the mock and in the paid bank is written to this standard: a clinical stem, four plausible options and the reasoning for the answer, with its source.
Cast Application Techniques
When applying a below-elbow cast, where should the cast end on the palm?
- AAt the proximal palmar crease, allowing full MCP flexionCorrect
- BAt the fingertips, so that all finger joints are immobilised
- CAt the wrist crease, leaving the palm free
- DOver the PIP joints of all fingers
Why: Ending the cast at the proximal palmar crease allows full metacarpophalangeal flexion and prevents stiffness. Extending it to the fingers restricts motion unnecessarily.
Source: Rockwood and Green's Fractures in Adults, 9th ed.
Cast Technician sample questions with answers
4 more original exam-style Cast Technician questions, worked in full. They are not real or recalled exam questions, and none of them is in the mock above or on the bank page, so sit the mock first if you have not.
Question 1 · Cast Application Techniques
How should cast padding be applied?
- AIn a single loose layer with no overlap at all
- BVery tightly so it supports the fracture
- COverlapping by about 50%, extra over bony points
- DOnly over the fracture site and nowhere else
Show answer and explanation
Correct answer: C. Overlapping by about 50%, extra over bony points
Padding is rolled evenly with about 50% overlap and extra protection over bony prominences. Tight padding constricts the limb, and padding only over the fracture leaves pressure points elsewhere.
Reference: British Orthopaedic Association Casting Standard
Question 2 · Casting Materials
Which combination most increases the risk of a thermal burn under a new plaster cast?
- ACool dip water and a thin, well-padded cast
- BFibreglass tape with normal room temperature water
- CLeaving the limb uncovered on a firm surface while it sets
- DWarm dip water, thick layers and a plastic-covered pillow
Show answer and explanation
Correct answer: D. Warm dip water, thick layers and a plastic-covered pillow
Heat rises with water temperature and cast thickness, and resting the limb on an insulating plastic pillow traps the heat. Leaving the limb uncovered allows heat to dissipate safely.
Reference: Halanski et al., Thermal Injury with Cast Application, J Bone Joint Surg Am 2007
Question 3 · Complications and Patient Monitoring
Once a cast has been split for suspected compartment syndrome, at what level should the limb be positioned?
- AElevated well above the heart
- BDependent below the waist
- CElevated with a tight sling
- DAt heart level
Show answer and explanation
Correct answer: D. At heart level
In suspected compartment syndrome the limb is kept at heart level; marked elevation lowers arterial pressure and can worsen perfusion of the compartment. Routine elevation is advised only for simple swelling.
Reference: BOAST Guidance: Diagnosis and Management of Compartment Syndrome of the Limbs
Question 4 · Cast Removal and Equipment Safety
A patient with diabetic neuropathy needs a cast removed. Why is extra care needed?
- ATheir casts are always thicker
- BTheir skin heals faster than normal
- CThey may not feel heat or a cut from the blade
- DCast saws cannot cut through synthetic casting material
Show answer and explanation
Correct answer: C. They may not feel heat or a cut from the blade
Reduced sensation means the patient cannot warn of blade heat or skin contact, so cooling pauses and close skin inspection are essential. Diabetic skin often heals more slowly, not faster.
Reference: British Orthopaedic Association Casting Standard
Free mock vs the full Cast Technician bank
The mock tells you where you stand. The bank is how you close the gap.
| What you get | Free mock | Full bank |
|---|---|---|
| Questions | 12 | 450+ |
| Papers | 1 short timed set | 3 to 6 full-length papers, about 150 each |
| Blueprint coverage | 6 of 7 domains | All 7 domains, 40 sub-topics |
| Worked rationale | Every question | Every question |
| Reference | Every question | Every question |
| Timing | 14 minutes in your browser | Exam-length papers to sit against the clock |
| Format | Online, free | PDF sent to you, yours to keep |
| Price | Free | AED 199, paid once |
Full Cast Technician bank
Close your gaps before exam day
- 450+ original questions in 3 to 6 full-length papers
- A worked rationale and a reference on every question
- Prepared for your regulator's blueprint and pass mark
One-time price
AED 199
About a third of one exam fee (about AED 660 per attempt)
Unlock the full bank →No subscription · yours to keep
Frequently asked questions
Is this Cast Technician mock test really free?
Are these real Cast Technician exam questions?
What is the pass mark for the Cast Technician exam?
How long is the Cast Technician exam and how many questions?
What topics does the Cast Technician exam cover?
How is the full Cast Technician bank different from this mock?
What score should I aim for on this Cast Technician mock?
Does passing this mock mean I will pass the real exam?
Which regulators is this Cast Technician mock for?
How many attempts do I get at the real exam?
Other free mock exams in allied
Keep going
From a 12-question mock to the full Cast Technician bank
450+ original questions in 3 to 6 full-length papers, each with a worked rationale and a reference, written to the same blueprint as the free mock on this page. One price: AED 199.