Neelim للاستشارات الصحية
Neelim

Cast Technician Prometric exam questions

Casting and splinting techniques, materials, complications and patient care.

For DHA · MOHAP · SHA · NHRADHA CTE5862Pass mark DHA 50%From 3 papers · ~150 Qs each
AED 199one-time
About a third of one exam fee
Request this question bank

Tell us your authority and we send the bank for that exam, usually the same day.

Or sit 12 questions free first →

What is riding on this exam

~AED 660
DHA exam fee, per attempt
Paid again on every re-sit. Other regulators' fees are in the table below.
3
UAE attempts - in total
Shared across DHA, DOH, MOHAP and SHA, not three each. Saudi, Qatar, Oman and Kuwait rules are in the FAQ.
50%
DHA pass mark
Pass or fail only. Other authorities set their own pass marks.

One failed attempt costs you the fee again, plus months of delay on your licence, your visa and your start date. This bank costs about a third of one exam fee.

Every regulator: format, pass marks and fees for all GCC licensing exams, each from the regulator's own documents.

The Cast Technician exam at a glance

DHA (UAE) publishes a Cast Technician exam of 100 MCQs in 2 hours with a 50% pass mark. MOHAP, SHA, NHRA do not publish Cast Technician-specific figures; their regulator-wide format and pass-mark rules are in the full table. DOH licenses the title without a published written exam (credential review, interview or an unpublished assessment). SCFHS, QCHP, OMSB, Kuwait MOH publish no exam for this title.

DHA · UAE
Cast Technician (CTE5862)
100 MCQs in 2 hours · pass mark 50% · USD 180 (about AED 660) · checked September 2026

From each regulator's own exam documents; the DHA row is from the DHA CBT Guideline, Sep 2026. Every other regulator is in the full GCC table.

Try two questions from this bank

Original questions from the bank - pick an answer to see the rationale and reference.

Q1Cast Application Techniques

How should a setting plaster cast be handled to avoid pressure points?

Choose an answer to see the rationale.

Q2Cast Removal and Equipment Safety

Which technique reduces the risk of burns when removing a cast with an oscillating saw?

Choose an answer to see the rationale.

Not sure where you stand? Sit 12 of these questions free, timed at real exam pace, and see which domains you are weakest in.

Take the free mock exam →

Liked those? The full bank has 450 questions at this standard - every one with a rationale and a reference.

Get the full bank - AED 199

What's inside

  • ✓3 to 6 full-length papers (~150 Q each)
  • ✓No question repeated between papers
  • ✓Four options, one unambiguous best answer
  • ✓A full rationale on every question
  • ✓A real guideline or textbook reference
  • ✓Every sub-topic in the published blueprint
  • ✓Researched by Neelim's exam research team
  • ✓Prepared for your authority's exam, not a generic set

The Cast Technician exam in every GCC country

Cast Technician licensing exam in every GCC country
RegulatorExamFormatPass markFee per attempt
Cast Technician (CTE5862)
100 MCQs in 2 hours50%USD 180 (about AED 660)
DOH
Abu Dhabi, Al Ain and Al Dhafra
Practise →
No written exam published
Oral assessment, 45-60 minutes; no written exam (DOH Licensing Procedure Manual 2024)
Panel / reviewNot publishedNot published
MOHAP
Northern Emirates - Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah
Practise →
MOHAP licensing exam
Regulator-wide format
Computer-basedNot publishedNot published
SHA
Emirate of Sharjah
Practise →
SHA licensing exam
Regulator-wide format
Set at assessmentNot publishedNot published
SCFHS
Kingdom of Saudi Arabia
Practise →
No exam published for this title
Not in the SCFHS classification exam list; check the title with SCFHS
Not publishedNot publishedNot published
QCHP
State of Qatar
Practise →
No exam published for this title
No DHP Qatar exam blueprint published for this title; check with DHP
Not publishedNot publishedNot published
NHRA
Kingdom of Bahrain
Practise →
NHRA licensing exam
Regulator-wide format
Prometric CBTNot publishedNot published
OMSB
Sultanate of Oman
Practise →
No exam published for this title
No OMSB exam published for this title; check with OMSB
Not publishedNot publishedNot published
Kuwait MOH
State of Kuwait
Practise →
No exam published for this title
Kuwait MOH publishes no exam for this title; check with the MOH
Not publishedNot publishedNot published

Highlighted rows publish figures for this exact Cast Technician exam; the others show the regulator's general rules.

From each regulator's own exam pages; anything a regulator does not publish says so. Assessment mode also depends on your licence title, so confirm your route on your eligibility notice.

Try 15 free Cast Technician questions with answersDifferent from the samples on this page - each with a full explanationStart →

What the Cast Technician exam covers

The published blueprint for this exam breaks into 7 domains and 40 testable sub-topics. Our bank covers every one of them - here is the full map, so you can see exactly what you are expected to know.

Musculoskeletal Anatomy and Fractures~15%6 topics
  • Bones and joints of the upper and lower limb
  • Fracture patterns: transverse, oblique, spiral, comminuted, greenstick
  • Distal radius fractures: Colles and Smith
  • Scaphoid and metacarpal fractures
  • Pediatric growth plate injuries: Salter-Harris
  • Peripheral nerves at risk from casts
Casting Materials~12%5 topics
  • Plaster of Paris: setting, drying and strength
  • Synthetic fibreglass and polyester casts
  • Exothermic reaction and burn prevention
  • Stockinette, padding and protective layers
  • Water temperature and material handling
Cast Application Techniques~18%7 topics
  • Below-elbow and above-elbow casts: landmarks
  • Below-knee and above-knee casts: ankle position
  • Padding technique over bony prominences
  • Three-point moulding principle
  • Position of safety for the hand
  • Cast wedging to correct angulation
  • Avoiding indentations and pressure points
Splints and Immobilisation Devices~12%5 topics
  • Backslabs for acute swollen injuries
  • Sugar-tong and ulnar gutter splints
  • Volar wrist and thumb spica splints
  • Bivalving and splitting casts
  • Walking boots and functional braces
Complications and Patient Monitoring~18%6 topics
  • Neurovascular observations
  • Compartment syndrome: recognition and first actions
  • Pressure sores under casts
  • Venous thromboembolism with lower limb immobilisation
  • Volkmann ischemic contracture
  • Skin problems: maceration and allergy
Cast Removal and Equipment Safety~10%5 topics
  • Oscillating cast saw: mechanism and technique
  • Preventing saw burns and lacerations
  • Cutting lines and bony prominences
  • Cast spreaders, scissors and equipment maintenance
  • Noise, dust and staff protection
Patient Education, Infection Control and Professional Practice~15%6 topics
  • Cast care instructions and warning signs
  • Elevation and exercise advice
  • Hand hygiene and cleaning of casting equipment
  • Plaster room waste and plaster traps
  • Consent, communication and documentation
  • Working within scope and escalating concerns

6 worked Cast Technician practice questions

Original exam-style questions from the bank, spread across the blueprint domains. They are not real or recalled exam questions. Try each one, then open the answer for the rationale and reference. None of them appear in the free mock exam, so reading them will not spoil it.

  1. Question 1 · Cast Application Techniques

    A metacarpal fracture is immobilised. In the position of safety, how are the hand joints placed?

    1. AMCP joints flexed 70-90 degrees, IP joints extended
    2. BMCP joints extended, IP joints flexed 90 degrees
    3. CAll finger joints fully extended
    4. DAll finger joints fully flexed
    Show answer and explanation

    Correct answer: A. MCP joints flexed 70-90 degrees, IP joints extended

    Collateral ligaments of the MCP joints are longest in flexion and those of the IP joints in extension, so this position prevents contracture. Extending the MCPs lets the ligaments shorten and stiffen.

    Reference: Green's Operative Hand Surgery, 8th ed.

  2. Question 2 · Cast Removal and Equipment Safety

    How does an oscillating cast saw cut a cast without usually cutting the skin?

    1. AThe blade rotates fully at a low speed
    2. BThe saw is only able to cut through wet plaster
    3. CA safety guard covers the whole blade
    4. DThe blade vibrates back and forth, not rotating
    Show answer and explanation

    Correct answer: D. The blade vibrates back and forth, not rotating

    The blade oscillates through a small arc, cutting rigid material while elastic skin moves with it. It can still cause burns or cuts if used incorrectly.

    Reference: British Orthopaedic Association Casting Standard

  3. Question 3 · Casting Materials

    Why should very hot water not be used when applying plaster of Paris?

    1. AHot water stops the plaster from setting properly
    2. BThe setting reaction releases heat and may burn
    3. CHot water makes the cast too heavy
    4. DHot water makes the plaster radiopaque
    Show answer and explanation

    Correct answer: B. The setting reaction releases heat and may burn

    Plaster setting is exothermic, and hot water speeds the reaction and raises the temperature, risking skin burns. Hot water accelerates setting rather than stopping it.

    Reference: British Orthopaedic Association Casting Standard

  4. Question 4 · Complications and Patient Monitoring

    A child had a supracondylar humerus fracture with a cold, pulseless hand that was missed. Weeks later the wrist and fingers are fixed in flexion. What is this complication?

    1. ADupuytren palmar contracture
    2. BVolkmann ischemic contracture
    3. CRadial nerve palsy
    4. DMalunion of the humerus
    Show answer and explanation

    Correct answer: B. Volkmann ischemic contracture

    Brachial artery injury or forearm compartment syndrome after supracondylar fracture can cause ischemic fibrosis of forearm flexors, producing Volkmann contracture. Dupuytren disease is a palmar fascia condition of adults.

    Reference: Rockwood and Wilkins' Fractures in Children, 9th ed.

  5. Question 5 · Musculoskeletal Anatomy and Fractures

    A child's distal radius fracture passes through the growth plate and exits through a corner of the metaphysis. What Salter-Harris type is this?

    1. AType II
    2. BType I
    3. CType III
    4. DType IV
    Show answer and explanation

    Correct answer: A. Type II

    Type II crosses the physis and exits through the metaphysis and is the most common type. Type III exits through the epiphysis into the joint, and type IV crosses metaphysis, physis and epiphysis.

    Reference: Rockwood and Wilkins' Fractures in Children, 9th ed.

  6. Question 6 · Musculoskeletal Anatomy and Fractures

    A distal radius fracture has volar displacement of the distal fragment after a fall onto a flexed wrist. What is it called?

    1. AColles fracture
    2. BChauffeur fracture
    3. CSmith fracture
    4. DMonteggia fracture
    Show answer and explanation

    Correct answer: C. Smith fracture

    A Smith fracture is a reverse Colles with volar displacement, often after a fall on a flexed wrist. A chauffeur fracture involves the radial styloid.

    Reference: Apley and Solomon's System of Orthopaedics and Trauma, 10th ed.

Cast Technician reference books and guidelines

Every question in this bank names the textbook or guideline its answer rests on. These are the sources our Cast Technician questions cite most often - the reading list to revise from alongside the bank.

Textbooks

4
  1. 1

    Apley and Solomon's System of Orthopaedics and Trauma

    10th edition
  2. 2

    Rockwood and Green's Fractures in Adults

    9th edition
  3. 3

    Rockwood and Wilkins' Fractures in Children

    9th edition
  4. 4

    Green's Operative Hand Surgery

    8th edition

Guidelines and standards

2
  1. 1

    NICE: Venous Thromboembolism in Over 16s

    NG89
  2. 2

    AAOS Clinical Practice Guideline on Carpal Tunnel Syndrome

    2016

Where your regulator publishes a reading list, use the editions it names. Exam questions are not taken from any one book.

Last reviewed September 2026

About these questions: every question is original, researched by Neelim's exam research team, written to the published blueprint, with a rationale and a reference. No recalled or leaked exam content is used. How we write our questions.

Frequently asked questions

Are these real Cast Technician exam questions?
No. Every item is original, researched by Neelim's exam research team against the exam blueprint published by the health authorities. Real, recalled or leaked exam content breaches the testing bodies' rules and can lead to a permanent exam ban - we do not sell it, and neither should anyone else.
How many questions are in the Cast Technician bank?
Every bank starts at 3 full-length papers of roughly 150 questions each (the DHA exam itself is 100 questions), and you can add papers up to 6, including a bonus paper of our hardest questions. The papers do not overlap, so every question is new, and together they cover every sub-topic in the published blueprint.
What is the pass mark for the DHA Cast Technician exam?
50%. DHA publishes the pass score for each exam, and 50% is the figure for Cast Technician (CTE5862) in the DHA CBT Guideline, Sep 2026. The result is posted to your Sheryan account as Pass or Fail only - your score is not shared.
How many questions are in the DHA Cast Technician exam, and how long is it?
100 multiple-choice questions in 2 hours, and the time includes registration and the introduction. It is a computer-based test delivered by Prometric at test centres in the UAE and abroad.
How much does the DHA Cast Technician exam cost?
USD 180 (about AED 660) per attempt, paid again for every re-sit. DHA also charges a flat AED 200 credentialing fee through Sheryan.
How many attempts do I get?
In the UAE, three in total across DHA, DOH, MOHAP and SHA, not three each, under clause 1.5.4 of the Unified PQR (April 2025). Clause 1.5.5 allows one further attempt with a different authority, except on the Consultant route. Elsewhere in the GCC: SCFHS up to 4 a year, QCHP 5 per scope, OMSB no set maximum, Kuwait MOH 3, 6 weeks apart.
Which GCC regulators license the Cast Technician title?
DHA sets a written exam (Cast Technician (CTE5862)). DOH licenses the title without a published written exam (credential review, interview or an unpublished assessment). SCFHS, QCHP, OMSB, Kuwait MOH publish no exam for this title. This bank prepares you for the written exam, and its content is the core knowledge any interview or assessment for the title draws on.
How do I receive it?
As PDF files. Card checkout is being set up, so for now you request it from this page and we send it to you directly, usually the same day.

Still unsure whether you even need this exam?

Your route depends on your profession, your licence title and the authority. We have guided over 1,000 professionals through GCC licensing - tell us your situation and we will confirm exactly what you need to sit.