Neelim Healthcare Consulting
Neelim

Free Dental Lab Technician mock test

12 original exam-style questions from our Dental Lab Technician bank, timed at the exam’s own pace, scored against the 55% DHA pass mark. They span 8 of the 8 blueprint domains, so you will see exactly where you are weakest - free, no sign-up.

DHA DLT5521Pass mark DHA 55% · DOH Pass / fail only · SCFHS 60% · QCHP 50%

Free diagnosticNo sign-up · no email · results instantly

Sit 12 original exam-style questions at real exam pace

These are 12 original questions taken from our Dental Lab Technician bank, spread across 8 of the 8 domains of the published blueprint. You get 72 seconds per question, which is exactly the pace of the real DLT5521 exam (14 minutes for 12). At the end you will see which domains you are weakest in, and the full worked reasoning for every question.

12
questions
14:24
time limit
55%
DHA pass mark

A short diagnostic cannot predict whether you will pass - only the real exam does that. It will show you, honestly, where you currently stand.

Quick answer

The Dental Lab Technician exam at a glance

The Dental Lab Technician licensing exam is a computer-based, multiple-choice test, and each GCC regulator sets its own. DHA, DOH, SCFHS and QCHP publish exact figures, listed below. This free mock gives you 12 original exam-style questions at 72 seconds each, scored against the 55% DHA pass mark, then shows your weakest domains.

Published exam figures

  • DHA

    Dental Lab Technician (DLT5521)

    UAE150 MCQs3 hours

    55%

    pass mark

  • DOH

    Dental Lab Technician CBT

    UAE50-100 MCQs1-2 hours

    Pass / fail only

    pass mark

  • SCFHS

    Saudi Classification Examination - Dental Laboratory Specialist

    Saudi Arabia150 MCQs180 minutes

    60%

    pass mark

  • QCHP

    Dental Lab Technician

    Qatar150 MCQs3 hours

    50%

    pass mark

Attempts in the UAE
3 in total across DHA, DOH, MOHAP and SHA
This free mock
12 questions · 14 minutes · 8 of 8 domains
Full bank
450+ questions · 3 to 6 papers · AED 199
Regulators
DHA, DOH, SCFHS, QCHP, MOHAP, SHA, NHRA, OMSB and Kuwait MOH

How this free Dental Lab Technician mock works

12
original questions
14 min
time limit
72s
per question
8 of 8
blueprint domains
  • You get 72 seconds per question, the pace of a 150-question paper in 3 hours. The timer runs in your browser and ends the sitting when it reaches zero.
  • Your score is set against the 55% DHA pass mark, the published figure for this exam. No other number is invented: there is no percentile and no pass probability.
  • At the end you see your score, your pace per question, every domain ranked weakest first, and the worked answer and source for all 12 questions.
  • You can mark each answer “sure” or “not sure”. Wrong answers you were sure about are shown first, because they are the ones you would not stop to check in the real exam.
  • Your last result is saved in your own browser only, so you can come back and compare. Nothing is sent to us.

What the real Dental Lab Technician licensing exam looks like

The Dental Lab Technician exam is a computer-based multiple-choice paper, published by 4 regulators: DHA DLT5521 (pass mark 55%), DOH (pass mark Pass / fail only), SCFHS (pass mark 60%), QCHP (pass mark 50%). Every regulator's format, pass mark and fee is in the table below; confirm yours before booking.

Pass marks at a glance: exam codes and pass marks by regulator for every written exam in one sourced table.

Before you can book the exam at all you need Dataflow primary source verification of your degree, licence and experience, which typically runs several weeks. Candidates often underestimate this and end up sitting the exam sooner after study than they planned. Check where you stand with our free eligibility checker or confirm whether your title even requires an exam using the Prometric exam checker.

You get three attempts in total across all UAE authorities, not three each, under the Unified Professional Qualification Requirements. At roughly AED 880 per attempt, plus the licensing delay each failure adds to your visa and start date, the cost of going in underprepared is not really the exam fee.

Dental Lab Technician licensing exam in every GCC country
RegulatorExamFormatPass markFee per attempt
Dental Lab Technician (DLT5521)
150 MCQs in 3 hours55%USD 240 (about AED 880)
DOH
Abu Dhabi, Al Ain and Al Dhafra
Practise →
Dental Lab Technician CBT
50-100 MCQs in 1-2 hoursPass / fail onlyAED 500
SCFHS
Kingdom of Saudi Arabia
Practise →
Saudi Classification Examination - Dental Laboratory Specialist
150 MCQs in 180 minutes60%Not published
QCHP
State of Qatar
Practise →
Dental Lab Technician
150 MCQs in 3 hours50%Not published
MOHAP
Northern Emirates - Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah
Practise →
MOHAP licensing exam
Regulator-wide format
Computer-basedNot publishedNot published
SHA
Emirate of Sharjah
Practise →
SHA licensing exam
Regulator-wide format
Set at assessmentNot publishedNot published
NHRA
Kingdom of Bahrain
Practise →
NHRA licensing exam
Regulator-wide format
Prometric CBTNot publishedNot published
OMSB
Sultanate of Oman
Practise →
No exam published for this title
No OMSB exam published for this title; check with OMSB
Not publishedNot publishedNot published
Kuwait MOH
State of Kuwait
Practise →
No exam published for this title
Kuwait MOH publishes no exam for this title; check with the MOH
Not publishedNot publishedNot published

Highlighted rows publish figures for this exact Dental Lab Technician exam; the others show the regulator's general rules.

What is on the Dental Lab Technician exam: the full blueprint

The published blueprint splits into 8 domains and 46 testable sub-topics. For each one you can see its weight, how many questions this mock asks on it, and about how many the full bank holds.

  • Dental Materials Science~16%

    6 sub-topics · 2 in this mock · about 72 in the full bank

  • Fixed Prosthodontics and Metal-Ceramics~16%

    7 sub-topics · 3 in this mock · about 72 in the full bank

  • All-Ceramic Restorations and CAD/CAM~12%

    5 sub-topics · 1 in this mock · about 54 in the full bank

  • Removable Partial Dentures~14%

    6 sub-topics · 2 in this mock · about 63 in the full bank

  • Complete Dentures~12%

    6 sub-topics · 1 in this mock · about 54 in the full bank

  • Orthodontic and Other Appliances~8%

    5 sub-topics · 1 in this mock · about 36 in the full bank

  • Dental Anatomy, Occlusion and Articulators~10%

    5 sub-topics · 1 in this mock · about 45 in the full bank

  • Laboratory Safety, Infection Control and Ethics~12%

    6 sub-topics · 1 in this mock · about 54 in the full bank

Bank counts are estimates from the published weights the bank is written to, rounded.

This mock samples 8 of 8 domains. The full bank covers all 8 across 450+ questions.

See the full bank - AED 199

How to use your mock score

These bands are set against the 55% DHA pass mark and match the verdict on your result screen. On 12 questions, a score near the pass mark has a 95% margin of error of about ±28 points, so treat the band as a direction, not a forecast.

Below 50%

Below the line

On this sample you would likely fall short of the 55% pass mark today. Do not book yet. Start with your two weakest domains from the result, then sit full-length papers until you clear the line with room to spare.

50% to 64%

Close to the line

A few questions decide it. On a 150-question paper, every 1% is one or two questions, so drill your weakest domains and build a margin on timed papers before you book.

65% and above

On track

Clear of the pass mark on this sample. 12 questions is a small sample, so confirm it over full-length timed papers before you book: stamina and pacing fail candidates who know the material.

Getting an honest score

  1. 1Sit it cold, once. Do not look anything up. A diagnostic you help yourself through tells you nothing. The number you get is only useful if it is honest.
  2. 2Read every rationale, especially the ones you got right. Getting a question right by elimination is not the same as knowing it. The worked reasoning is free, whether or not you buy anything.
  3. 3Work on your weakest domain first. The breakdown orders your domains worst first for exactly this reason. Studying what you are already good at feels productive and moves nothing.
  4. 4Re-sit under full exam conditions later. The real paper is much longer than 12 questions and stamina matters. The full bank's 3 to 6 papers are written for exactly this.

A worked Dental Lab Technician exam question

Every question in the mock and in the paid bank is written to this standard: a clinical stem, four plausible options and the reasoning for the answer, with its source.

All-Ceramic Restorations and CAD/CAM

A dentist sends an intraoral scan to the laboratory. Which open file format is most commonly used for the 3D surface mesh?

  1. ADICOM
  2. BSTLCorrect
  3. CJPEG
  4. DDOCX

Why: STL describes surfaces as triangle meshes and is the standard open format for exchanging scan and design data. DICOM is the format for CT and CBCT images, not surface scans.

Source: Sakaguchi, Craig's Restorative Dental Materials, 14th ed.

Dental Lab Technician sample questions with answers

4 more original exam-style Dental Lab Technician questions, worked in full. They are not real or recalled exam questions, and none of them is in the mock above or on the bank page, so sit the mock first if you have not.

  1. Question 1 · All-Ceramic Restorations and CAD/CAM

    How should the fitting surface of a zirconia crown be prepared for resin bonding?

    1. AHydrofluoric acid etching followed by silane
    2. BLow-pressure alumina air abrasion and MDP primer
    3. CPhosphoric acid etching only
    4. DRoughening with a coarse diamond bur only
    Show answer and explanation

    Correct answer: B. Low-pressure alumina air abrasion and MDP primer

    Zirconia has no glass phase, so hydrofluoric acid does not etch it; gentle alumina air abrasion and an MDP-containing primer give a durable bond. HF acid with silane is the protocol for glass-ceramics such as lithium disilicate.

    Reference: Blatz MB, et al. J Dent Res 2018; Sakaguchi, Craig's Restorative Dental Materials, 14th ed.

  2. Question 2 · Complete Dentures

    When setting maxillary central incisors for a complete denture, how far anterior to the centre of the incisive papilla is the labial surface usually placed?

    1. A1-2 mm
    2. B8-10 mm
    3. C3-4 mm
    4. D15-18 mm
    Show answer and explanation

    Correct answer: B. 8-10 mm

    The labial surfaces of the maxillary central incisors are usually 8-10 mm anterior to the centre of the incisive papilla, a useful starting guide for lip support. Placing them only 1-2 mm forward gives poor lip support.

    Reference: Zarb, Prosthodontic Treatment for Edentulous Patients, 13th ed.

  3. Question 3 · Dental Materials Science

    A heat-cured acrylic denture shows bubbles concentrated in the thickest part of the palate, not near the surface. What is the most likely cause?

    1. AToo little pressure during packing
    2. BToo much separating medium applied
    3. CCuring temperature raised too quickly
    4. DPolymer-to-monomer ratio too high
    Show answer and explanation

    Correct answer: C. Curing temperature raised too quickly

    Rapid heating lets the exothermic reaction push the internal temperature above the boiling point of monomer (about 100.8 C), causing gaseous porosity in thick sections. Too little packing pressure causes porosity spread throughout the base, not concentrated in thick areas.

    Reference: Anusavice, Phillips' Science of Dental Materials, 12th ed.

  4. Question 4 · Dental Anatomy, Occlusion and Articulators

    When waxing a full-contour crown for a mandibular first molar, how many cusps are normally created?

    1. AFive
    2. BThree
    3. CFour
    4. DSix
    Show answer and explanation

    Correct answer: A. Five

    The mandibular first molar normally has five cusps: mesiobuccal, distobuccal, distal, mesiolingual and distolingual. The mandibular second molar typically has four.

    Reference: Wheeler's Dental Anatomy, Physiology and Occlusion, 11th ed.

Last reviewed September 2026. About these questions: every item is original, written to the published blueprint, with a rationale and a reference, and no recalled or leaked exam content is used. How we write our questions.

Free mock vs the full Dental Lab Technician bank

The mock tells you where you stand. The bank is how you close the gap.

Free Dental Lab Technician mock compared with the full bank
What you getFree mockFull bank
Questions12450+
Papers1 short timed set3 to 6 full-length papers, about 150 each
Blueprint coverage8 of 8 domainsAll 8 domains, 46 sub-topics
Worked rationaleEvery questionEvery question
ReferenceEvery questionEvery question
Timing14 minutes in your browserExam-length papers to sit against the clock
FormatOnline, freePDF sent to you, yours to keep
PriceFreeAED 199, paid once

Full Dental Lab Technician bank

Close your gaps before exam day

  • 450+ original questions in 3 to 6 full-length papers
  • A worked rationale and a reference on every question
  • Prepared for your regulator's blueprint and pass mark

One-time price

AED 199

About a quarter of one exam fee (about AED 880 per attempt)

Unlock the full bank →

No subscription · yours to keep

Frequently asked questions

Is this Dental Lab Technician mock test really free?
Yes. All 12 questions, your score, the domain breakdown and the full worked answers are free, with no sign-up, no email and no payment. The paid Dental Lab Technician bank is a separate, much larger set of 450+ questions across 3 to 6 papers at AED 199.
Are these real Dental Lab Technician exam questions?
No. They are original questions written to the published Dental Lab Technician blueprint and drawn from our full bank, not leaked or recalled items. Recalled questions breach exam security rules and are often out of date. These follow the exam's format and domain weighting.
What is the pass mark for the Dental Lab Technician exam?
By regulator: DHA DLT5521 (pass mark 55%), DOH (pass mark Pass / fail only), SCFHS (pass mark 60%), QCHP (pass mark 50%), each from the regulator's own exam documents. Regulators not listed publish no figure for this exam, so confirm yours before booking. Most report only pass or fail and never release your score, which is why a diagnostic like this is useful.
How long is the Dental Lab Technician exam and how many questions?
DHA: 150 MCQs in 3 hours; DOH: 50-100 MCQs in 1-2 hours; SCFHS: 150 MCQs in 180 minutes; QCHP: 150 MCQs in 3 hours, from each regulator's own exam documents (DHA's time includes registration and the introduction, per the DHA CBT Guideline, Sep 2026). Regulators not listed publish no length for this exam, so confirm theirs in the current candidate bulletin.
What topics does the Dental Lab Technician exam cover?
The published blueprint has 8 domains and 46 testable sub-topics. The heaviest are Dental Materials Science (~16%), Fixed Prosthodontics and Metal-Ceramics (~16%) and Removable Partial Dentures (~14%). The full domain list with weights is on this page.
How is the full Dental Lab Technician bank different from this mock?
This mock is 12 questions across 8 of the 8 blueprint domains, enough to rank your domains. The full bank is 450+ questions in 3 to 6 full-length papers of about 150 questions, covering every domain, with about 72 questions on Dental Materials Science alone. Every question has a worked rationale and a reference. It costs AED 199, paid once.
What score should I aim for on this Dental Lab Technician mock?
Aim for at least 65%, which is 10 points over the 55% DHA pass mark. Below 50% you would likely fall short today; between 50% and 64% a few questions decide it. On 12 questions a score near the pass mark has a margin of error of about ±28 points, so read it as a direction.
Does passing this mock mean I will pass the real exam?
No, and we will not claim otherwise. 12 questions cannot predict a full-length paper: the margin of error is about ±28 points. What it does reliably show is which blueprint domains you are weakest in, so you know where to start.
Which regulators is this Dental Lab Technician mock for?
It is written to the shared Dental Lab Technician blueprint, so it fits DHA, DOH, SCFHS, QCHP, MOHAP, SHA, NHRA, OMSB and Kuwait MOH. DHA, DOH, SCFHS and QCHP publish an exam for this exact title. What changes by regulator is the length, the pass mark and the local regulation questions.
How many attempts do I get at the real exam?
In the UAE, three in total across DHA, DOH, MOHAP and SHA under the Unified Professional Qualification Requirements, not three per authority. Each attempt costs roughly AED 880, which is why it pays to find your weak domains first.

Other free mock exams in dental

From a 12-question mock to the full Dental Lab Technician bank

450+ original questions in 3 to 6 full-length papers, each with a worked rationale and a reference, written to the same blueprint as the free mock on this page. One price: AED 199.