Neelim Healthcare Consulting
Neelim

Free Medical Laboratory Technologist mock test

25 original exam-style questions from our Medical Laboratory Technologist bank, timed at the exam’s own pace, scored against the 50% DHA pass mark. They span 9 of the 9 blueprint domains, so you will see exactly where you are weakest - free, no sign-up.

DHA LAB5631OMSB OEMLSPass mark DHA 50% · SCFHS 530 on a 200-800 scale · QCHP 50% · OMSB 55% · Kuwait MOH 60%

Free diagnosticNo sign-up · no email · results instantly

Sit 25 original exam-style questions at real exam pace

These are 25 original questions taken from our Medical Laboratory Technologist bank, spread across 9 of the 9 domains of the published blueprint. You get 72 seconds per question, which is exactly the pace of the real LAB5631 exam (30 minutes for 25). At the end you will see which domains you are weakest in, and the full worked reasoning for every question.

25
questions
30:00
time limit
50%
DHA pass mark

A short diagnostic cannot predict whether you will pass - only the real exam does that. It will show you, honestly, where you currently stand.

Quick answer

The Medical Laboratory Technologist exam at a glance

The Medical Laboratory Technologist licensing exam is a computer-based, multiple-choice test, and each GCC regulator sets its own. DHA, SCFHS, QCHP, OMSB and Kuwait MOH publish exact figures, listed below. This free mock gives you 25 original exam-style questions at 72 seconds each, scored against the 50% DHA pass mark, then shows your weakest domains.

Published exam figures

  • DHA

    Medical Laboratory Technologist (LAB5631)

    UAE150 MCQs3 hours

    50%

    pass mark

  • SCFHS

    Saudi Laboratory Specialist Licensure Examination (SLLE)

    Saudi Arabia200 MCQs240 minutes

    530 on a 200-800 scale

    pass mark

  • QCHP

    Lab Technologist

    Qatar150 MCQs3 hours

    50%

    pass mark

  • OMSB

    Omani Examination for Medical Laboratory Specialists (OEMLS)

    Oman100 MCQs150 minutes

    55%

    pass mark

  • Kuwait MOH

    Lab Technician

    Kuwait150 MCQs170 minutes

    60%

    pass mark

Attempts in the UAE
3 in total across DHA, DOH, MOHAP and SHA
This free mock
25 questions · 30 minutes · 9 of 9 domains
Full bank
444 questions · 3 papers · AED 249
Regulators
DHA, SCFHS, QCHP, OMSB, Kuwait MOH, DOH, MOHAP, SHA and NHRA

How this free Medical Laboratory Technologist mock works

25
original questions
30 min
time limit
72s
per question
9 of 9
blueprint domains
  • You get 72 seconds per question, the pace of a 150-question paper in 3 hours. The timer runs in your browser and ends the sitting when it reaches zero.
  • Your score is set against the 50% DHA pass mark, the published figure for this exam. No other number is invented: there is no percentile and no pass probability.
  • At the end you see your score, your pace per question, every domain ranked weakest first, and the worked answer and source for all 25 questions.
  • You can mark each answer “sure” or “not sure”. Wrong answers you were sure about are shown first, because they are the ones you would not stop to check in the real exam.
  • Your last result is saved in your own browser only, so you can come back and compare. Nothing is sent to us.

What the real Medical Laboratory Technologist licensing exam looks like

The Medical Laboratory Technologist exam is a computer-based multiple-choice paper, published by 5 regulators: DHA LAB5631 (pass mark 50%), SCFHS SLLE (pass mark 530/800), QCHP (pass mark 50%), OMSB OEMLS (pass mark 55%), Kuwait MOH (pass mark 60%). Every regulator's format, pass mark and fee is in the table below; confirm yours before booking.

Pass marks at a glance: exam codes and pass marks by regulator for every written exam in one sourced table.

Before you can book the exam at all you need Dataflow primary source verification of your degree, licence and experience, which typically runs several weeks. Candidates often underestimate this and end up sitting the exam sooner after study than they planned. Check where you stand with our free eligibility checker or confirm whether your title even requires an exam using the Prometric exam checker.

You get three attempts in total across all UAE authorities, not three each, under the Unified Professional Qualification Requirements. At roughly AED 880 per attempt, plus the licensing delay each failure adds to your visa and start date, the cost of going in underprepared is not really the exam fee.

Medical Laboratory Technologist licensing exam in every GCC country
RegulatorExamFormatPass markFee per attempt
Medical Laboratory Technologist (LAB5631)
150 MCQs in 3 hours50%USD 240 (about AED 880)
SCFHS
Kingdom of Saudi Arabia
Practise →
Saudi Laboratory Specialist Licensure Examination (SLLE)
200 MCQs in 240 minutes530 on a 200-800 scaleNot published
QCHP
State of Qatar
Practise →
Lab Technologist
150 MCQs in 3 hours50%Not published
OMSB
Sultanate of Oman
Practise →
Omani Examination for Medical Laboratory Specialists (OEMLS)
100 MCQs in 150 minutes55%USD 200 (about OMR 80)
Kuwait MOH
State of Kuwait
Practise →
Lab Technician
150 MCQs in 170 minutes60%Not published
DOH
Abu Dhabi, Al Ain and Al Dhafra
Practise →
DOH licensing exam
Regulator-wide format
Written + oral/OSCEPass / fail onlyNot published
MOHAP
Northern Emirates - Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah
Practise →
MOHAP licensing exam
Regulator-wide format
Computer-basedNot publishedNot published
SHA
Emirate of Sharjah
Practise →
SHA licensing exam
Regulator-wide format
Set at assessmentNot publishedNot published
NHRA
Kingdom of Bahrain
Practise →
NHRA licensing exam
Regulator-wide format
Prometric CBTNot publishedNot published

Highlighted rows publish figures for this exact Medical Laboratory Technologist exam; the others show the regulator's general rules.

What is on the Medical Laboratory Technologist exam: the full blueprint

The published blueprint splits into 9 domains and 147 testable sub-topics. For each one you can see its weight, how many questions this mock asks on it, and about how many the full bank holds.

  • General Laboratory, Quality Management & Safety~20%

    20 sub-topics · 4 in this mock · about 89 in the full bank

    est.

  • Clinical Chemistry~18%

    18 sub-topics · 4 in this mock · about 80 in the full bank

    est.

  • Hematology~15%

    18 sub-topics · 4 in this mock · about 67 in the full bank

    est.

  • Coagulation & Hemostasis~5%

    12 sub-topics · 4 in this mock · about 22 in the full bank

    est.

  • Immunology & Serology~4%

    15 sub-topics · 2 in this mock · about 18 in the full bank

    est.

  • Immunohematology (Blood Group Serology)~10%

    16 sub-topics · 1 in this mock · about 44 in the full bank

    est.

  • Blood Banking & Transfusion Services~8%

    14 sub-topics · 4 in this mock · about 36 in the full bank

    est.

  • Microbiology~13%

    18 sub-topics · 1 in this mock · about 58 in the full bank

    est.

  • Urinalysis & Body Fluids~7%

    16 sub-topics · 1 in this mock · about 31 in the full bank

    est.

Bank counts are estimates from the published weights the bank is written to, rounded.

This mock samples 9 of 9 domains. The full bank covers all 9 across 444 questions.

See the full bank - AED 249

How to use your mock score

These bands are set against the 50% DHA pass mark and match the verdict on your result screen. On 25 questions, a score near the pass mark has a 95% margin of error of about ±20 points, so treat the band as a direction, not a forecast.

Below 45%

Below the line

On this sample you would likely fall short of the 50% pass mark today. Do not book yet. Start with your two weakest domains from the result, then sit full-length papers until you clear the line with room to spare.

45% to 59%

Close to the line

A few questions decide it. On a 150-question paper, every 1% is one or two questions, so drill your weakest domains and build a margin on timed papers before you book.

60% and above

On track

Clear of the pass mark on this sample. 25 questions is a small sample, so confirm it over full-length timed papers before you book: stamina and pacing fail candidates who know the material.

Getting an honest score

  1. 1Sit it cold, once. Do not look anything up. A diagnostic you help yourself through tells you nothing. The number you get is only useful if it is honest.
  2. 2Read every rationale, especially the ones you got right. Getting a question right by elimination is not the same as knowing it. The worked reasoning is free, whether or not you buy anything.
  3. 3Work on your weakest domain first. The breakdown orders your domains worst first for exactly this reason. Studying what you are already good at feels productive and moves nothing.
  4. 4Re-sit under full exam conditions later. The real paper is much longer than 25 questions and stamina matters. The full bank's 3 papers are written for exactly this.

A worked Medical Laboratory Technologist exam question

Every question in the mock and in the paid bank is written to this standard: a clinical stem, four plausible options and the reasoning for the answer, with its source.

Clinical Chemistry

A patient has a low TSH with an elevated free T4. These results are most consistent with which condition?

  1. APrimary hypothyroidism
  2. BPrimary hyperthyroidismCorrect
  3. CSecondary (central) hypothyroidism
  4. DEuthyroid sick syndrome

Why: In primary hyperthyroidism, excess thyroid hormone (high free T4) suppresses pituitary TSH through negative feedback, producing a low TSH with a high free T4. Primary hypothyroidism shows high TSH with low T4, central hypothyroidism shows low or inappropriately normal TSH with low T4, and euthyroid sick syndrome typically shows low T3 with variable TSH.

Source: Tietz Fundamentals of Clinical Chemistry and Molecular Diagnostics, 8th ed., 2019

Medical Laboratory Technologist sample questions with answers

10 more original exam-style Medical Laboratory Technologist questions, worked in full. They are not real or recalled exam questions, and none of them is in the mock above or on the bank page, so sit the mock first if you have not.

  1. Question 1 · Clinical Chemistry

    A patient has a total serum calcium of 7.6 mg/dL (low) and an albumin of 2.0 g/dL. After correcting for the low albumin, the calcium is within normal limits. This illustrates that total calcium is affected by albumin because:

    1. AApproximately half of serum calcium is bound to albumin and other proteins
    2. BAlbumin directly synthesizes calcium
    3. CIonized calcium always falls when albumin is low
    4. DAlbumin increases calcium excretion in urine
    Show answer and explanation

    Correct answer: A. Approximately half of serum calcium is bound to albumin and other proteins

    About 40-50% of serum calcium is protein-bound, mainly to albumin, so hypoalbuminemia lowers total calcium while the physiologically active ionized calcium may remain normal. The corrected calcium formula (add 0.8 mg/dL per 1 g/dL albumin below 4.0) accounts for this. Ionized calcium is not necessarily reduced, and albumin does not synthesize or excrete calcium.

    Reference: Tietz Textbook of Clinical Chemistry and Molecular Diagnostics, 6th ed., 2018

  2. Question 2 · Microbiology

    A modified acid-fast stain using a weaker (1% sulfuric acid) decolorizer, rather than the standard acid-alcohol, is preferred to demonstrate which organism because it is only partially acid-fast?

    1. AMycobacterium tuberculosis
    2. BNocardia species
    3. CStaphylococcus aureus
    4. DEscherichia coli
    Show answer and explanation

    Correct answer: B. Nocardia species

    Nocardia species are only partially (weakly) acid-fast and lose the stain with the strong acid-alcohol used for mycobacteria, so a weaker decolorizer (modified Kinyoun) is used to retain the carbolfuchsin. M. tuberculosis is strongly acid-fast and demonstrated by standard Ziehl-Neelsen; Staphylococcus and E. coli are not acid-fast at all.

    Reference: Tille, Bailey & Scott's Diagnostic Microbiology, 15th ed. (Elsevier, 2022)

  3. Question 3 · Blood Banking & Transfusion Services

    During a transfusion reaction workup, the post-transfusion direct antiglobulin test (DAT) is positive but the pretransfusion DAT was negative. What does this finding most strongly suggest?

    1. ABacterial contamination of the unit
    2. BIn vivo coating of transfused donor red cells by recipient antibody, consistent with a hemolytic reaction
    3. CVolume overload
    4. DAllergic reaction to plasma proteins
    Show answer and explanation

    Correct answer: B. In vivo coating of transfused donor red cells by recipient antibody, consistent with a hemolytic reaction

    A newly positive post-transfusion DAT indicates recipient antibody has coated transfused donor cells in vivo, supporting an immune hemolytic reaction (often a mixed-field pattern). Bacterial contamination is assessed by culture and Gram stain, TACO and allergic reactions do not produce a positive DAT.

    Reference: AABB Technical Manual, 20th ed.

  4. Question 4 · Coagulation & Hemostasis

    Factor XIII (fibrin stabilizing factor) deficiency should be suspected in a patient with delayed bleeding and poor wound healing despite which laboratory finding?

    1. AProlonged PT and aPTT
    2. BNormal PT, aPTT, thrombin time, and platelet count
    3. CMarkedly reduced fibrinogen concentration
    4. DProlonged thrombin time with normal PT
    Show answer and explanation

    Correct answer: B. Normal PT, aPTT, thrombin time, and platelet count

    Factor XIII cross-links fibrin monomers to stabilize the clot but acts after fibrin polymerization, so routine screening tests (PT, aPTT, thrombin time, fibrinogen, platelets) are all normal in factor XIII deficiency. Diagnosis requires a specific clot solubility test (5M urea) or a factor XIII activity assay, so a normal coagulation screen with clinical bleeding is the classic clue.

    Reference: Rodak's Hematology, 6th ed., 2020; ISTH guidance on factor XIII deficiency

  5. Question 5 · General Laboratory, Quality Management & Safety

    On a brightfield microscope, progressively closing the condenser (aperture) iris diaphragm will:

    1. AIncrease resolution while decreasing contrast
    2. BIncrease the field of view without affecting image quality
    3. CIncrease contrast but decrease resolution
    4. DHave no measurable effect on the image
    Show answer and explanation

    Correct answer: C. Increase contrast but decrease resolution

    The aperture (condenser) iris diaphragm controls the numerical aperture of the illumination. Closing it increases contrast and depth of field but reduces the effective numerical aperture, thereby lowering resolution. Field of view is governed by the field diaphragm and eyepiece, not the aperture diaphragm.

    Reference: Turgeon ML, Clinical Laboratory Science: Concepts, Procedures, and Clinical Applications, 8th ed. (Elsevier, 2020)

  6. Question 6 · Hematology

    A 30-year-old's bone marrow biopsy is estimated to be 70% cellular. Using the common age-based rule of thumb (cellularity approximately equals 100 minus age), this finding is best interpreted as:

    1. AMarkedly hypocellular
    2. BAplastic
    3. CMarkedly hypercellular
    4. DApproximately normocellular
    Show answer and explanation

    Correct answer: D. Approximately normocellular

    A rough estimate of expected marrow cellularity is 100 minus the patient's age, giving about 70% for a 30-year-old, so 70% cellularity is approximately normal for this age. It is not hypocellular, aplastic, or markedly hypercellular by this estimate.

    Reference: Rodak's Hematology: Clinical Principles and Applications, 6th ed. (2020)

  7. Question 7 · Immunohematology (Blood Group Serology)

    During tube typing, a technologist observes one solid aggregate of red cells with a clear background after resuspension. Which grade of agglutination best describes this reaction?

    1. A4+
    2. B2+
    3. C1+
    4. DMixed-field
    Show answer and explanation

    Correct answer: A. 4+

    A single solid agglutinate with a clear (cell-free) supernatant is the strongest reaction and is graded 4+. A 2+ reaction shows several medium-sized clumps in a turbid background, and 1+ shows many small clumps with a turbid, reddish background. Mixed-field describes a few small agglutinates among many free unagglutinated cells, not a single solid clump.

    Reference: Harmening, Modern Blood Banking and Transfusion Practices, 7th edition, 2019

  8. Question 8 · Urinalysis & Body Fluids

    A patient presents after a crush injury with red-brown urine. The reagent strip blood pad is strongly positive, yet microscopic examination shows no red blood cells and the plasma is clear/straw-colored rather than pink. These findings most strongly support which diagnosis?

    1. AMyoglobinuria from rhabdomyolysis
    2. BIntravascular hemolysis with hemoglobinuria
    3. CHematuria from lower urinary tract bleeding
    4. DPorphyrinuria from acute porphyria
    Show answer and explanation

    Correct answer: A. Myoglobinuria from rhabdomyolysis

    A positive blood pad with no RBCs on microscopy indicates either myoglobin or hemoglobin. Myoglobin is a small molecule that does not bind haptoglobin and is rapidly cleared, so plasma stays clear/straw-colored, whereas free hemoglobin binds haptoglobin and discolors plasma pink, making option 2 unlikely here. The crush-injury history points to rhabdomyolysis. Intact RBCs would be seen in true hematuria (option 3), and porphyrins do not react with the peroxidase-based blood pad (option 4).

    Reference: Brunzel, Fundamentals of Urine and Body Fluid Analysis, 4th ed. (2018)

  9. Question 9 · Immunology & Serology

    Which feature most clearly distinguishes adaptive immunity from innate immunity?

    1. ARecognition of conserved pathogen-associated molecular patterns
    2. BImmediate response within minutes of exposure
    3. CImmunologic memory with a more rapid, robust secondary response
    4. DReliance on physical barriers such as skin and mucosa
    Show answer and explanation

    Correct answer: C. Immunologic memory with a more rapid, robust secondary response

    Immunologic memory, producing a faster and stronger response on re-exposure, is a defining hallmark of adaptive immunity. Recognition of conserved PAMPs by pattern-recognition receptors, immediate responses, and physical barriers are all characteristics of innate immunity, which lacks true antigen-specific memory.

    Reference: Abbas, Lichtman & Pillai, Cellular and Molecular Immunology, 10th ed., 2022

  10. Question 10 · Clinical Chemistry

    A patient's total serum calcium is reported as 7.8 mg/dL (reference 8.6-10.2 mg/dL) but the patient is asymptomatic. The serum albumin is low at 2.0 g/dL (reference 3.5-5.0 g/dL). After correcting calcium for the low albumin, what is the most likely interpretation?

    1. ATrue hypocalcemia requiring urgent calcium replacement
    2. BCorrected calcium is approximately normal; the low total value reflects hypoalbuminemia
    3. CThe result indicates primary hyperparathyroidism
    4. DThe specimen must be contaminated with EDTA
    Show answer and explanation

    Correct answer: B. Corrected calcium is approximately normal; the low total value reflects hypoalbuminemia

    About 40% of total calcium is albumin-bound, so hypoalbuminemia lowers total calcium without affecting the physiologically active ionized fraction. Using the correction of roughly +0.8 mg/dL per 1.0 g/dL decrease in albumin below 4.0 g/dL, the corrected calcium (7.8 + 0.8 x 2.0 = 9.4 mg/dL) is normal, explaining why the patient is asymptomatic. This is pseudohypocalcemia, not true hypocalcemia or hyperparathyroidism, and EDTA contamination would markedly lower calcium and typically elevate potassium, not fit this picture.

    Reference: Payne RB et al., BMJ, albumin-adjusted calcium (1973); Tietz Textbook of Clinical Chemistry and Molecular Diagnostics, 6th ed. (2018)

Last reviewed September 2026. About these questions: every item is original, written to the published blueprint, with a rationale and a reference, and no recalled or leaked exam content is used. How we write our questions.

Free mock vs the full Medical Laboratory Technologist bank

The mock tells you where you stand. The bank is how you close the gap.

Free Medical Laboratory Technologist mock compared with the full bank
What you getFree mockFull bank
Questions25444
Papers1 short timed set3 full-length papers, about 150 each
Blueprint coverage9 of 9 domainsAll 9 domains, 147 sub-topics
Worked rationaleEvery questionEvery question
ReferenceEvery questionEvery question
Timing30 minutes in your browserExam-length papers to sit against the clock
FormatOnline, freePDF sent to you, yours to keep
PriceFreeAED 249, paid once

Full Medical Laboratory Technologist bank

Close your gaps before exam day

  • 444 original questions in 3 full-length papers
  • A worked rationale and a reference on every question
  • Prepared for your regulator's blueprint and pass mark

One-time price

AED 249

About a quarter of one exam fee (about AED 880 per attempt)

Unlock the full bank →

No subscription · yours to keep

Frequently asked questions

Is this Medical Laboratory Technologist mock test really free?
Yes. All 25 questions, your score, the domain breakdown and the full worked answers are free, with no sign-up, no email and no payment. The paid Medical Laboratory Technologist bank is a separate, much larger set of 444 questions across 3 papers at AED 249.
Are these real Medical Laboratory Technologist exam questions?
No. They are original questions written to the published Medical Laboratory Technologist blueprint and drawn from our full bank, not leaked or recalled items. Recalled questions breach exam security rules and are often out of date. These follow the exam's format and domain weighting.
What is the pass mark for the Medical Laboratory Technologist exam?
By regulator: DHA LAB5631 (pass mark 50%), SCFHS SLLE (pass mark 530/800), QCHP (pass mark 50%), OMSB OEMLS (pass mark 55%), Kuwait MOH (pass mark 60%), each from the regulator's own exam documents. Regulators not listed publish no figure for this exam, so confirm yours before booking. Most report only pass or fail and never release your score, which is why a diagnostic like this is useful.
How long is the Medical Laboratory Technologist exam and how many questions?
DHA: 150 MCQs in 3 hours; SCFHS: 200 MCQs in 240 minutes; QCHP: 150 MCQs in 3 hours; OMSB: 100 MCQs in 150 minutes; Kuwait MOH: 150 MCQs in 170 minutes, from each regulator's own exam documents (DHA's time includes registration and the introduction, per the DHA CBT Guideline, Sep 2026). Regulators not listed publish no length for this exam, so confirm theirs in the current candidate bulletin.
What topics does the Medical Laboratory Technologist exam cover?
The published blueprint has 9 domains and 147 testable sub-topics. The heaviest are General Laboratory, Quality Management & Safety (~20%), Clinical Chemistry (~18%) and Hematology (~15%). The full domain list with weights is on this page.
How is the full Medical Laboratory Technologist bank different from this mock?
This mock is 25 questions across 9 of the 9 blueprint domains, enough to rank your domains. The full bank is 444 questions in 3 full-length papers of about 150 questions, covering every domain, with about 89 questions on General Laboratory, Quality Management & Safety alone. Every question has a worked rationale and a reference. It costs AED 249, paid once.
What score should I aim for on this Medical Laboratory Technologist mock?
Aim for at least 60%, which is 10 points over the 50% DHA pass mark. Below 45% you would likely fall short today; between 45% and 59% a few questions decide it. On 25 questions a score near the pass mark has a margin of error of about ±20 points, so read it as a direction.
Does passing this mock mean I will pass the real exam?
No, and we will not claim otherwise. 25 questions cannot predict a full-length paper: the margin of error is about ±20 points. What it does reliably show is which blueprint domains you are weakest in, so you know where to start.
Which regulators is this Medical Laboratory Technologist mock for?
It is written to the shared Medical Laboratory Technologist blueprint, so it fits DHA, SCFHS, QCHP, OMSB, Kuwait MOH, DOH, MOHAP, SHA and NHRA. DHA, SCFHS, QCHP, OMSB and Kuwait MOH publish an exam for this exact title. What changes by regulator is the length, the pass mark and the local regulation questions.
How many attempts do I get at the real exam?
In the UAE, three in total across DHA, DOH, MOHAP and SHA under the Unified Professional Qualification Requirements, not three per authority. Each attempt costs roughly AED 880, which is why it pays to find your weak domains first.

Other free mock exams in allied

From a 25-question mock to the full Medical Laboratory Technologist bank

444 original questions in 3 full-length papers, each with a worked rationale and a reference, written to the same blueprint as the free mock on this page. One price: AED 249.