Cast Technician Prometric exam questions
Casting and splinting techniques, materials, complications and patient care.
Tell us your authority and we send the bank for that exam, usually the same day.
What is riding on this exam
One failed attempt costs you the fee again, plus months of delay on your licence, your visa and your start date. This bank costs about a third of one exam fee.
Every regulator: format, pass marks and fees for all GCC licensing exams, each from the regulator's own documents.
The Cast Technician exam at a glance
DHA (UAE) publishes a Cast Technician exam of 100 MCQs in 2 hours with a 50% pass mark. MOHAP, SHA, NHRA do not publish Cast Technician-specific figures; their regulator-wide format and pass-mark rules are in the full table. DOH licenses the title without a published written exam (credential review, interview or an unpublished assessment). SCFHS, QCHP, OMSB, Kuwait MOH publish no exam for this title.
- DHA · UAE
- Cast Technician (CTE5862)
- 100 MCQs in 2 hours · pass mark 50% · USD 180 (about AED 660) · checked September 2026
From each regulator's own exam documents; the DHA row is from the DHA CBT Guideline, Sep 2026. Every other regulator is in the full GCC table.
Try two questions from this bank
Original questions from the bank - pick an answer to see the rationale and reference.
How should a setting plaster cast be handled to avoid pressure points?
Choose an answer to see the rationale.
Which technique reduces the risk of burns when removing a cast with an oscillating saw?
Choose an answer to see the rationale.
Not sure where you stand? Sit 12 of these questions free, timed at real exam pace, and see which domains you are weakest in.
Take the free mock exam →Liked those? The full bank has 450 questions at this standard - every one with a rationale and a reference.
Get the full bank - AED 199What's inside
- ✓3 to 6 full-length papers (~150 Q each)
- ✓No question repeated between papers
- ✓Four options, one unambiguous best answer
- ✓A full rationale on every question
- ✓A real guideline or textbook reference
- ✓Every sub-topic in the published blueprint
- ✓Researched by Neelim's exam research team
- ✓Prepared for your authority's exam, not a generic set
The Cast Technician exam in every GCC country
| Regulator | Exam | Format | Pass mark | Fee per attempt |
|---|---|---|---|---|
Cast Technician (CTE5862) | 100 MCQs in 2 hours | 50% | USD 180 (about AED 660) | |
No written exam published Oral assessment, 45-60 minutes; no written exam (DOH Licensing Procedure Manual 2024) | Panel / review | Not published | Not published | |
MOHAP licensing exam Regulator-wide format | Computer-based | Not published | Not published | |
SHA licensing exam Regulator-wide format | Set at assessment | Not published | Not published | |
No exam published for this title Not in the SCFHS classification exam list; check the title with SCFHS | Not published | Not published | Not published | |
No exam published for this title No DHP Qatar exam blueprint published for this title; check with DHP | Not published | Not published | Not published | |
NHRA licensing exam Regulator-wide format | Prometric CBT | Not published | Not published | |
No exam published for this title No OMSB exam published for this title; check with OMSB | Not published | Not published | Not published | |
No exam published for this title Kuwait MOH publishes no exam for this title; check with the MOH | Not published | Not published | Not published |
Highlighted rows publish figures for this exact Cast Technician exam; the others show the regulator's general rules.
From each regulator's own exam pages; anything a regulator does not publish says so. Assessment mode also depends on your licence title, so confirm your route on your eligibility notice.
Try 15 free Cast Technician questions with answersDifferent from the samples on this page - each with a full explanationStart →What the Cast Technician exam covers
The published blueprint for this exam breaks into 7 domains and 40 testable sub-topics. Our bank covers every one of them - here is the full map, so you can see exactly what you are expected to know.
Musculoskeletal Anatomy and Fractures~15%6 topics
- Bones and joints of the upper and lower limb
- Fracture patterns: transverse, oblique, spiral, comminuted, greenstick
- Distal radius fractures: Colles and Smith
- Scaphoid and metacarpal fractures
- Pediatric growth plate injuries: Salter-Harris
- Peripheral nerves at risk from casts
Casting Materials~12%5 topics
- Plaster of Paris: setting, drying and strength
- Synthetic fibreglass and polyester casts
- Exothermic reaction and burn prevention
- Stockinette, padding and protective layers
- Water temperature and material handling
Cast Application Techniques~18%7 topics
- Below-elbow and above-elbow casts: landmarks
- Below-knee and above-knee casts: ankle position
- Padding technique over bony prominences
- Three-point moulding principle
- Position of safety for the hand
- Cast wedging to correct angulation
- Avoiding indentations and pressure points
Splints and Immobilisation Devices~12%5 topics
- Backslabs for acute swollen injuries
- Sugar-tong and ulnar gutter splints
- Volar wrist and thumb spica splints
- Bivalving and splitting casts
- Walking boots and functional braces
Complications and Patient Monitoring~18%6 topics
- Neurovascular observations
- Compartment syndrome: recognition and first actions
- Pressure sores under casts
- Venous thromboembolism with lower limb immobilisation
- Volkmann ischemic contracture
- Skin problems: maceration and allergy
Cast Removal and Equipment Safety~10%5 topics
- Oscillating cast saw: mechanism and technique
- Preventing saw burns and lacerations
- Cutting lines and bony prominences
- Cast spreaders, scissors and equipment maintenance
- Noise, dust and staff protection
Patient Education, Infection Control and Professional Practice~15%6 topics
- Cast care instructions and warning signs
- Elevation and exercise advice
- Hand hygiene and cleaning of casting equipment
- Plaster room waste and plaster traps
- Consent, communication and documentation
- Working within scope and escalating concerns
6 worked Cast Technician practice questions
Original exam-style questions from the bank, spread across the blueprint domains. They are not real or recalled exam questions. Try each one, then open the answer for the rationale and reference. None of them appear in the free mock exam, so reading them will not spoil it.
Question 1 · Cast Application Techniques
A metacarpal fracture is immobilised. In the position of safety, how are the hand joints placed?
- AMCP joints flexed 70-90 degrees, IP joints extended
- BMCP joints extended, IP joints flexed 90 degrees
- CAll finger joints fully extended
- DAll finger joints fully flexed
Show answer and explanation
Correct answer: A. MCP joints flexed 70-90 degrees, IP joints extended
Collateral ligaments of the MCP joints are longest in flexion and those of the IP joints in extension, so this position prevents contracture. Extending the MCPs lets the ligaments shorten and stiffen.
Reference: Green's Operative Hand Surgery, 8th ed.
Question 2 · Cast Removal and Equipment Safety
How does an oscillating cast saw cut a cast without usually cutting the skin?
- AThe blade rotates fully at a low speed
- BThe saw is only able to cut through wet plaster
- CA safety guard covers the whole blade
- DThe blade vibrates back and forth, not rotating
Show answer and explanation
Correct answer: D. The blade vibrates back and forth, not rotating
The blade oscillates through a small arc, cutting rigid material while elastic skin moves with it. It can still cause burns or cuts if used incorrectly.
Reference: British Orthopaedic Association Casting Standard
Question 3 · Casting Materials
Why should very hot water not be used when applying plaster of Paris?
- AHot water stops the plaster from setting properly
- BThe setting reaction releases heat and may burn
- CHot water makes the cast too heavy
- DHot water makes the plaster radiopaque
Show answer and explanation
Correct answer: B. The setting reaction releases heat and may burn
Plaster setting is exothermic, and hot water speeds the reaction and raises the temperature, risking skin burns. Hot water accelerates setting rather than stopping it.
Reference: British Orthopaedic Association Casting Standard
Question 4 · Complications and Patient Monitoring
A child had a supracondylar humerus fracture with a cold, pulseless hand that was missed. Weeks later the wrist and fingers are fixed in flexion. What is this complication?
- ADupuytren palmar contracture
- BVolkmann ischemic contracture
- CRadial nerve palsy
- DMalunion of the humerus
Show answer and explanation
Correct answer: B. Volkmann ischemic contracture
Brachial artery injury or forearm compartment syndrome after supracondylar fracture can cause ischemic fibrosis of forearm flexors, producing Volkmann contracture. Dupuytren disease is a palmar fascia condition of adults.
Reference: Rockwood and Wilkins' Fractures in Children, 9th ed.
Question 5 · Musculoskeletal Anatomy and Fractures
A child's distal radius fracture passes through the growth plate and exits through a corner of the metaphysis. What Salter-Harris type is this?
- AType II
- BType I
- CType III
- DType IV
Show answer and explanation
Correct answer: A. Type II
Type II crosses the physis and exits through the metaphysis and is the most common type. Type III exits through the epiphysis into the joint, and type IV crosses metaphysis, physis and epiphysis.
Reference: Rockwood and Wilkins' Fractures in Children, 9th ed.
Question 6 · Musculoskeletal Anatomy and Fractures
A distal radius fracture has volar displacement of the distal fragment after a fall onto a flexed wrist. What is it called?
- AColles fracture
- BChauffeur fracture
- CSmith fracture
- DMonteggia fracture
Show answer and explanation
Correct answer: C. Smith fracture
A Smith fracture is a reverse Colles with volar displacement, often after a fall on a flexed wrist. A chauffeur fracture involves the radial styloid.
Reference: Apley and Solomon's System of Orthopaedics and Trauma, 10th ed.
Cast Technician reference books and guidelines
Every question in this bank names the textbook or guideline its answer rests on. These are the sources our Cast Technician questions cite most often - the reading list to revise from alongside the bank.
Textbooks
4- 1
Apley and Solomon's System of Orthopaedics and Trauma
10th edition - 2
Rockwood and Green's Fractures in Adults
9th edition - 3
Rockwood and Wilkins' Fractures in Children
9th edition - 4
Green's Operative Hand Surgery
8th edition
Guidelines and standards
2- 1
NICE: Venous Thromboembolism in Over 16s
NG89 - 2
AAOS Clinical Practice Guideline on Carpal Tunnel Syndrome
2016
Where your regulator publishes a reading list, use the editions it names. Exam questions are not taken from any one book.
Last reviewed September 2026
About these questions: every question is original, researched by Neelim's exam research team, written to the published blueprint, with a rationale and a reference. No recalled or leaked exam content is used. How we write our questions.
Before you book your exam
Frequently asked questions
Are these real Cast Technician exam questions?
How many questions are in the Cast Technician bank?
What is the pass mark for the DHA Cast Technician exam?
How many questions are in the DHA Cast Technician exam, and how long is it?
How much does the DHA Cast Technician exam cost?
How many attempts do I get?
Which GCC regulators license the Cast Technician title?
How do I receive it?
Still unsure whether you even need this exam?
Your route depends on your profession, your licence title and the authority. We have guided over 1,000 professionals through GCC licensing - tell us your situation and we will confirm exactly what you need to sit.